With the improvement of the current level of power grids, the requirements of the opening level of the vacuum switches are also increasing. Vacuum arc cathode spots provide steam and electrons and, to a certain extent, determine the opening capacity of the vacuum switch. In this paper, a vacuum arc cathode spot research platform based on the de‐mountable vacuum chamber is constructed. The characteristics of the vacuum arc cathode spots under the transverse magnetic field (TMF) contacts are assessed by a high‐speed charge coupled device. The experimental results show that the cathode spot diffusion process can be divided into three processes through cathode spot distribution, arc voltage and current: initial diffusion stage of cathode spots, unstable motion stage of cathode spots, and extinguishing stage. The motion mode of cathode spots during unstable motion stage can be divided into cathode spots group stagnation (CSGS) to multi‐cathode jet (MCJ) switch mode, cathode spots group motion (CSGM) to MCJ switch mode, CSGM mode, and MCJ mode. The effects of peak current and contact diameter on unstable motion mode were analysed.
For better application of X-ray digital imaging technology in defect detection in Gas Insulated Switchgear (GIS), it is essential to investigate the typical defect and establish the defect database, which has not been adequately performed in previous work. Systematic experimental research is also needed to accumulate data and experience. In this research, an experimental platform, including Computed Radiography (CR) imaging system and a GIS model, is built, and extensive tests of different kinds of typical defects are studied. The influence X-ray irradiation on SF6 under different tube voltage levels is firstly examined, which proves that the withstand voltage of SF6 gas has not been affected and no dissociation has been found. Then, several kinds of defects are tested by X-ray digital imaging technology. The successful application examples of “visual” detection of defects further prove the practicability and validity of the X-ray digital imaging technique. Finally, the image database of typical defects inside of GIS is established and the defect risk is also analyzed in three levels, which would be useful for the defect severity diagnosis and risk assessment.
Dielectric materials with high thermal conductivity and outstanding dielectric properties are highly desirable for advanced electronics. However, simultaneous integration of those superior properties for a material remains a daunting challenge. Here, a multifunctional epoxy composite is fulfilled by incorporation of boron nitride nanosheets (BNNSs) and mesoporous silica coated multi-walled carbon nanotubes (MWCNTs@mSiO2). Owing to the effective establishment of continuous thermal conductive network, the obtained BNNSs/MWCNTs@mSiO2/epoxy composite exhibits a high thermal conductivity of 0.68 W m−1 K−1, which is 187% higher than that of epoxy matrix. In addition, the introducing of mesoporous silica dielectric layer can screen charge movement to shut off leakage current between MWCNTs, which imparts BNNSs/MWCNTs@mSiO2/epoxy composite with high dielectric constant (8.10) and low dielectric loss (<0.01) simultaneously. It is believed that the BNNSs/MWCNTs@mSiO2/epoxy composites with admirable features have potential applications in modern electronics.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.