No abstract

A simple and reliable catalyst patterning technique combined with electric-field-guided growth is utilized to synthesize a sharp and high-aspect-ratio carbon nanocone probe on a tipless cantilever for atomic force microscopy. A single carbon nanodot produced by an electron-beam-induced deposition serves as a convenient chemical etch mask for catalyst patterning, thus eliminating the need for complicated, resist-based, electron-beam lithography for a nanoprobe fabrication. A gradual, sputtering-induced size reduction and eventual removal of the catalyst particle at the probe tip during electric-field-guided growth creates a sharp probe with a tip radius of only a few nanometers. These fabrication processes are amenable for the wafer-scale synthesis of multiple probes. High resolution imaging of three-dimensional features and deep trenches, and mechanical durability enabling continuous operation for many hours without noticeable image deterioration have been demonstrated.

No abstract

In this paper, we report that the thermal conductivity (TC) of heat transfer nanofluids containing Ni coated single wall carbon nanotube can be enhanced by applied magnetic field. A reasonable explanation for these interesting results is that Ni coated nanotubes form aligned chains under applied magnetic field, which improves thermal conductivity via increased contacts. On longer holding in magnetic field, the nanotubes gradually move and form large clumps of nanotubes, which eventually decreases the TC. When we reduce the magnetic field strength and maintain a smaller field right after TC reaches the maximum, the TC value can be kept longer compared to without magnetic field. We attribute gradual magnetic clumping to the gradual cause of the TC decrease in the magnetic field. We also found that the time to reach the maximum peak value of TC is increased as the applied magnetic field is reduced. Scanning electron microscopy images show that the Ni coated nantubes are aligned well under the influence of a magnetic field. Transmission electron microscopy images indicate that nickel remains attached onto the nanotubes after the magnetic field exposure.