The high-temperature mechanical properties and microstructure of forging billets of C-Si-Mn-Cr and C-Si-Mn-Cr-Mo ultra-high-strength cold-rolled steels (tensile strength≥1000 MPa, elongation≥10%) were studied. Through the comparison of reduction in area and hot deformation resistance at 600-1300°C, the Mo-containing steel was found to possess a higher strength and a better plasticity than the Mo-free one. The equilibrium phase diagram and atom fraction of Mo in different phases at different temperatures were calculated by Thermo-Calc software (TCW). The results analyzed by using transmission electron microscopy and TCW show that precipitates in the Mo-containing steel are primarily M 23 C 6 , which promote pearlite formation. The experimental data also show that a lower ductility point existing in the Mo-free steel at 850°C is eliminated in the Mo-containing one. This is mainly due to the segregation of Mo at grain boundaries investigated by electron probe microanalysis (EPMA), which improves the strength of grain boundaries.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.