No abstract

The resonant oscillation of burned gases in the combustion chamber of direct injection (DI) diesel engines appears to be the main excitation source of the engine block during combustion. This has led to the application of different techniques in order to study its generation mechanisms and to determine its relationship with combustion parameters such as bowl geometry, type of injector, injection parameters, etc. In this paper, a numerical methodology for the analysis of combustion chamber resonances is proposed. The numerical approach is validated by comparison with results from modal theory in a simple case. Then, this technique has been applied to the analysis of three different bowls, indicating their potential for the control of combustion chamber resonances.

The combustion process in direct injection (DI) Diesel engines is an important source of noise, and it is thus the main reason why end-users could be reluctant to drive vehicles powered with this type of engine. This means that the great potential of Diesel engines for environment preservation—due to their lower consumption and the subsequent reduction of CO2 emissions—may be lost. Moreover, the advanced combustion concepts—e.g. the HCCI (homogeneous charge compression ignition)—developed to comply with forthcoming emissions legislation, while maintaining the efficiency of current engines, are expected to be noisier because they are characterized by a higher amount of premixed combustion. For this reason many efforts have been dedicated by car manufacturers in recent years to reduce the overall level and improve the sound quality of engine noise. Evaluation procedures are required, both for noise levels and sound quality, that may be integrated in the global engine development process in a timely and cost-effective manner. In previous published work, the authors proposed a novel method for the assessment of engine noise level. A similar procedure is applied in this paper to demonstrate the suitability of combustion indicators for the evaluation of engine noise quality. These indicators, which are representative of the peak velocity of fuel burning and the resonance in the combustion chamber, are well correlated with the combustion noise mark obtained from jury testing. Quite good accuracy in the prediction of the engine noise quality has been obtained with the definition of a two-component regression, which also permits the identification of the combustion process features related to the resulting noise quality, so that corrective actions may be proposed.

No abstract

PurposeThe purpose of this computational fluid dynamics (CFD) study is to give insight about the influence of the piston bowl geometry and the fuel ignition features on the resonance of direct injection diesel engines combustion chambers in order to provide support to the experimental findings on combustion noise.Design/methodology/approachThe resonance due to the burned gases oscillations in a diesel combustion chamber is caused by the sudden rise in pressure due to the initial ignition of the air‐fuel mixture, and leads to the resonance noise. In the CFD study presented here the excitation source is represented by imposing locally in a small area (excitation zone) the pressure and temperature gradients of the start of combustion. The CFD approach is first validated against the acoustic modal theory. A parametric study representing different ignition conditions is then performed with a real bowl geometry.FindingsThe solutions obtained are analysed in terms of the energy of resonance (ER) and the response in the frequency domain. It was found that the response in frequency only varies with the diameter of the bowl, while the ER varies significantly in function of the injection conditions.Research limitations/implicationsThese first conclusions need to be verified on the one hand by taking into account the piston motion, and, on the other hand, by modelling in a more realistic way the combustion excitation.Practical implicationsThis CFD study has brought some insight into the flow phenomena that affect the resonance modes of a combustion chamber.Originality/valueThis CFD study uses a novel methodology to model the effect of the combustion excitation on the resonance modes of a combustion chamber.

No abstract

No abstract

ElsevierBroatch Jacobi, JA.; Margot, X.; Novella Rosa, R.; Gómez-Soriano, J. (2016). Combustion noise analysis of partially premixed combustion concept using gasoline fuel in a 2-stroke engine. Energy. 107:612-624. AbstractIn the last decade, different advanced combustion concepts based on generating totally or partially premixed conditions have been investigated in CI engines with the aim of achieving lower NOx and soot emissions. Most of the drawbacks inherent to this type of combustions, such as the combustion phasing control or combustion stability, can be mitigated by combining the PPC concept fueled by gasoline and a small 2-stroke HSDI engine. However, combustion noise issue remains unsolved while it is a critical aspect due to its strong influence in the customer purchasing decision and compliance of more stringent regulations. In this work, an analysis of the combustion noise generated by PPC combustion concept is performed in order to identify the most influential parameters and to define key paths for controlling the noise level. In addition, 3D CFD simulations have been performed to further understand the combustion noise generation mechanisms. Results evidence how the strong impact of the maximum pressure time-derivative achieved during combustion process renders all other sources of noise generation irrelevant. The trade-off between combustion noise and combustion efficiency of this PPC concept has been confirmed, while the intrinsic relation between such parameters and the engine efficiency has been also evaluated.