Abstract| Energy conservation is a critical issue in ad hoc wireless networks for node and network life, as the nodes are powered by batteries only. One major approach for energy conservation is to route a communication session along the routes which requires the lowest total energy consumption. This optimization problem is referred to as minimum-energy routing. While minimum-energy unicast routing can be solved in polynomial time by shortest-path algorithms, it remains open whether minimum-energy broadcast routing can be solved in polynomial time, despite of the NP-hardness of its general graph version. Recently three greedy heuristics were proposed in 8]: MST (minimum spanning tree), SPT (shortest-path tree), and BIP (broadcasting incremental power). They have been evaluated through simulations in 8], but little is known about their analytical performance. The main contribution of this paper is the quantitative characterization of their performances in terms of approximation ratios. By exploring geometric structures of Euclidean MSTs, we h a ve been able to prove that the approximation ratio of MST is between 6 and 12, and the approximation ratio of BIP is between 13 3 and 12. On the other hand, the approximation ratio of SPT is shown to be at least n 2 , w h e r e n is the number of receiving nodes. To our best knowledge, these are the rst analytical results for minimum-energy broadcasting.

No abstract

This paper addresses the problem of localized scatternet formation for multihop Bluetooth-based personal area ad hoc networks. Nodes are assumed to know their positions and are able to establish connections with any of their neighboring nodes, located within their transmission radius, in the neighbor discovery phase. The next phase of the proposed formation algorithm is optional and can be applied to construct a sparse geometric structure in a localized manner. We propose here a new sparse planar structure, namely, partial Delaunay triangulation (PDT), which can be constructed locally and is denser than other known localized planar structures. In the next mandatory phase, the degree of each node is limited to seven by applying the Yao structure, and the master-slave relations in piconets are formed in created subgraphs. This phase consists of several iterations. In each iteration, undecided nodes with higher keys than any of their undecided neighbors apply the Yao structure to bound the degrees, decide masterslave relations on the remaining edges, and inform all neighbors about either deleting edges or master-slave decisions. To the best of our knowledge, our schemes are the first schemes that construct degree limited (a node has at most seven slaves) and connected piconets in multihop networks, without parking any node. The creation and maintenance require small overhead in addition to maintaining accurate location information for one-hop neighbors. The experiments confirm good functionality of created Bluetooth networks in addition to their fast creation and straightforward maintenance.

Abstract-Sleep scheduling is a widely used mechanism in wireless sensor networks (WSNs) to reduce the energy consumption since it can save the energy wastage caused by the idle listening state. In a traditional sleep scheduling, however, sensors have to start up numerous times in a period, and thus consume extra energy due to the state transitions. The objective of this paper is to design an energy efficient sleep scheduling for low data-rate WSNs, where sensors not only consume different amounts of energy in different states (transmit, receive, idle and sleep), but also consume energy for state transitions. We use TDMA as the MAC layer protocol, because it has the advantages of avoiding collisions, idle listening and overhearing. We first propose a novel interference-free TDMA sleep scheduling problem called contiguous link scheduling, which assigns sensors with consecutive time slots to reduce the frequency of state transitions. To tackle this problem, we then present efficient centralized and distributed algorithms that use time slots at most a constant factor of the optimum. The simulation studies corroborate the theoretical results, and show the efficiency of our proposed algorithms.

No abstract

No abstract

No abstract

Abstract-Energy-efficient broadcast communication is an important problem in wireless ad hoc networks. Previously, minimum-energy broadcast that exploits the broadcast nature of radio transmission has been studied and shown to be NP-complete for omnidirectional antennas. In this paper, we investigate the minimum-energy broadcast problem under a wide spectrum of directional antenna models, including sectored antennas with fixed sectors and beamwidth and antenna array-based smart antennas with varying degrees of beam orientation and beamwidth. We first propose the RF design and implementation of each model, which suggests the practical parameters of antennas under that model. We then show that the minimum-energy broadcast problem under each of the antenna models is NP-complete. Lastly, we present a heuristic algorithm based on BIP for the above problem under each directional antenna model and experimentally compare the energy efficiency of using different directional antennas using these heuristics. Our results show that using antennas with adjustable orientation and variable beamwidth gives the best results. For such antennas, the scanning angle is the dominant factor in improving the quality of the broadcast trees. The number of antennas per node is not that critical to obtaining a better broadcast tree as long as it is large enough to cover the entire 360 • around a node so as to prevent network partitioning.