The influence of zirconium on the mechanical properties and phase transformation was investigated in low carbon steel. First, the steels are subjected to a special thermomechanical regime, and the hot rolled plates were used to characterise the tensile properties and impact toughness. Second, the phase transformation behaviour of the steels with various Zr contents was evaluated by both dilatometry and metallography. Finally, to confirm the existence of Zr containing precipitates in the Zr added steels, transmission electron microscopy and energy dispersive spectroscopy were used. It was verified that plenty of fine spherical (Nb,Ti,Zr)C, which is identified to be nearly 10 nm, can be formed when the concentration of Zr is in the range of 0.015–0.030. The effects of zirconium on the phase transformation, including proeutectoid ferrite and pearlite transformation, and mechanical properties evolution were also identified and discussed.

The effect of Zr addition on the toughness and microstructure of coarse grained heat affected zone (CGHAZ) in Al deoxidised low carbon steel was investigated. In this present work, the specimens (Zr free and Zr added) were subjected to weld thermal cycle with heat input of 54, 80 and 100 kJ cm 21 at 13508C peak temperature using thermal simulator. The typical inclusions were characterised by scanning electron microscopy, and the chemical composition of the inclusions was determined by energy dispersive spectroscopy. The nanoscale precipitates were analysed by transmission electron microscopy and energy dispersive spectroscopy. It was verified that the occurrence of Zr in steel mostly exists in the form of oxide inclusions, but a few in the form of solid solution state and Zr containing precipitates when the concentration of Zr is 0.015%. The improvement of CGHAZ toughness is obtained when the heat input is 80-100 kJ cm 21 . The possible reasons about the effects of Zr on the toughness of CGHAZ, including Zr containing inclusions, precipitates and microstructure characteristics, were also discussed.