The coordination between the powertrain and control strategy has significant impacts on the operating performance of hybrid electric vehicles (HEVs). A comprehensive methodology based on Particle Swarm Optimization (PSO) is presented in this paper to achieve parameter optimization for both the powertrain and the control strategy, with the aim of reducing fuel consumption, exhaust emissions, and manufacturing costs of the HEV. The original multi-objective optimization problem is converted into a single-objective problem with a goal-attainment method, and the principal parameters of powertrain and control strategy are set as the optimized variables by PSO, with the dynamic performance index of HEVs being defined as the constraint condition. Computer simulations were carried out, which showed that the PSO scheme gives preferable results in comparison to the ADVISOR method. Therefore, fuel consumption and exhaust emissions of HEVs can be effectively reduced without sacrificing dynamic performance of HEVs.

No abstract

No abstract

This study investigated power density and relevant information related to light-curing units used in private dental offices in Changchun City, China. The power density of 196 light-curing units used in private dental offices in Changchun City was measured using a simple random sampling method. Relevant information included the brand, type, years of operation, frequency of use, model numbers and types of light guide, resin buildup on the light guides, damage caused by the light guides, required maintenance of the curing lights, and ratio of the unit and chair number. There were 132 quartz tungsten halogen (QTH) units and 64 light-emitting diode units. The power density range was defined as 0-1,730 mW/cm(2). The mean power density was 453.1 mW/cm(2). The mean years of operation of the light-curing units were 3.96. The majority of dentists never tested the power density of the light-curing units and a considerable number of light guide surfaces showed resin buildup and damage. In Changchun City, the majority of light-curing units were QTH. Some units needed to be replaced due to aging. The majority of dentists were not aware that the light-curing units require periodic testing and maintenance. The data herein indicate the importance of periodic testing of the power density of light-curing units and timely replacement of the components and then guarantee the quality of medical services and their benefits to patients.