This article aims to minimize cycle time for a simple assembly line balancing problem type 2 by presenting a variable neighborhood strategy adaptive search method (VaNSAS) in a case study of the garment industry considering the number and types of machines used in each workstation in a simple assembly line balancing problem type 2 (SALBP-2M). The variable neighborhood strategy adaptive search method (VaNSAS) is a new method that includes five main steps, which are (1) generate a set of tracks, (2) make all tracks operate in a specified black box, (3)operate the black box, (4) update the track, and (5) repeat the second to fourth steps until the termination condition is met. The proposed methods have been tested with two groups of test instances, which are datasets of (1) SALBP-2 and (2) SALBP-2M. The computational results show that the proposed methods outperform the best existing solution found by the LINGO modeling program. Therefore, the VaNSAS method provides a better solution and features a much lower computational time.objective of this research is to develop an appropriate method for solving a simple assembly line balancing problem type 2, presenting a case study of the garment industry.Chesbrough [1] said that large organizations work together to drive innovation and create sustainable growth by using the concept of open innovation, which is considered to be related to industry that has adopted "technology, tools, or methods" for the industry in production systems, as well as making products according to the various needs of consumers. However, the industry still has to maintain production efficiency in order to meet the required quality. In addition, new technology, tools, and methods must be also studied and selected to be suitable for the production system and the current knowledge. Many industries still rely on human labor for production, especially the garment industry. When a problem occurs, it will be solved immediately without applying technology or any new methods to resolve it, which causes production efficiency to be at a low level. Therefore, to increase the capacity of the production system, in order to compete with other industries, it is necessary to use the concept of open innovation to help in production planning, reduce the time required for industry operations, and increase production efficiency.The assembly line balancing problem is a form of production planning used for task assignments [2] or to assign work to each station to let each work station operate with the same average production time and allow the process flow system to be flexible and eliminate delay or bottlenecks in order to be able to produce products correctly and eliminate mistakes during production. The precedence diagram or table of relationships determines the operation according to the workflow that is clearly specified in the production process. There are different objectives for problem solving, such as reducing production time, reducing the number of workstations, determining the efficiency of assembly line bal...
In this study, we constructed a new algorithm to determine the optimal parameters for friction stir welding including rotational speed, welding speed, axial force, tool pin profile, and tool material. The objective of welding is to maximize the ultimate tensile strength of the welded aluminum. The proposed method combines the response surface method and the modified differential evolution algorithm (RSM-MDE). RSM-MDE is a method that involves both experimental and simulation procedures. It is composed of four steps: (1) finding the number of parameters and their levels that affect the efficiency of the friction stir welding, (2) using RSM to formulate the regression model, (3) using the MDE algorithm to find the optimal parameter of the regression model obtained from (2), and (4) verifying the results obtained from step (3). The optimal parameters generated by the RSM-MDE method were a rotation speed of 1417.68 rpm, a welding speed of 60.21 mm/min, an axial force of 8.44 kN, a hexagon-tapered tool pin profile, and the SKD 11 tool material. The ultimate tensile strength obtained from this set of parameters was 294.84 MPa, which was better than that of the RSM by 1.48%.
This research presents a solution to the family tourism route problem by considering daily time windows. To find the best solution for travel routing, the modified adaptive large neighborhood search (MALNS) method, using the four destructions and the four reconstructions approach, is applied here. The solution finding performance of the MALNS method is compared with an exact method running on the Lingo program. As shown by various solutions, the MALNS method can balance travel routing designs, including when many tourist attractions are present in each path. Furthermore, the results of the MALNS method are not significantly different from the results of the exact method for small problem sizes. For medium and large problem sizes, the MALNS method shows a higher performance and a smaller processing time for finding solutions. The values for the average total travel cost and average travel satisfaction rating derived by the MALNS method are approximately 0.18% for a medium problem and 0.05% for a large problem, 0.24% for a medium problem, and 0.21% for a large problem, respectively. The values derived from the exact method are slightly different. Moreover, the MALNS method calculation requires less processing time than the exact method, amounting to approximately 99.95% of the time required for the exact method. In this case study, the MALNS algorithm result shows a suitable balance of satisfaction and number of tourism places in relation to the differences between family members of different ages and genders in terms of satisfaction in tour route planning. The proposed solution methodology presents an effective high-quality solution, suggesting that the MALNS method has the potential to be a great competitive algorithm. According to the empirical results shown here, the MALNS method would be useful for creating route plans for tourism organizations that support travel route selection for family tours in Thailand.
This research addresses the problem of planning tourism routes and finding appropriate shopping (market place) locations for agricultural product transportation. Generally, tourists visit popular tourism attractions; and generally, unpopular tourism attractions do not stimulate the economy, trade, or local income. Popular tourism attractions that are located far away from each other require the transportation of local products, and tourists must make decisions as to which locations to visit when planning their vacation. Planning a tourism route while balancing tourism attractions and shopping markets is important for the economic stimulation of tourism. This work presents a problem-solving method for tourism route-planning for a particular case study in Chiang Rai province, Thailand, using the Adaptive Large Neighborhood Search (ALNS) method. Six main destruction and five repair cycles in the ALNS method were applied to solve the tourism route design problem and to find the best solution so that tourists can visit all of the main attractions. We found that 13 tourism routes provide the shortest travel distance for each travel route. The total distance traveled was 2538.02 km for all routes. To balance the tourism on all routes, the popular and less popular tourism attractions were combined. For all routes, the shopping market location is the best place for tourism products to be sold and where tourist relaxation occurs. The results from ALNS were compared with the results from those obtained by the exact Lingo program V11. The ALNS algorithm results were not significantly different from the Lingo results. For the computational results for all examined cases, the ALNS algorithm was shown to be competitive, with short processing times given the sizes of the problems. For the traveling distance, the ALNS result significantly differs from the exact method by approximately 1.12%, and had a better effect than the exact method by approximately 99% in terms of processing time. Therefore, the proposed methodology provides an effective and high-quality solution for tourism route planning.
In this study, we present a new algorithm for finding the optimal friction stir welding parameters to maximize the tensile strength of a butt joint made of the semisolid material (SSM) ADC12 aluminum. The welding parameters were rotational speed, welding speed, tool tilt, tool pin profile, and rotational direction. The method presented is a variable neighborhood strategy adaptive search (VaNSAS) approach. The process of finding the optimal friction stir welding parameters comprises five steps: (1) identifying the type and range of friction stir parameters using a literature survey; (2) performing experiments according to (1); (3) constructing a regression model using the response surface method optimizer (RSM optimizer); (4) using VaNSAS to find the optimal parameters for the model obtained from (3); and (5) confirming the results from (4) using the parameter levels obtained from (4) to perform real experiments. The computational results revealed that the tensile strength generated from VaNSAS was 3.67% higher than the tensile strength obtained from the RSM optimizer parameters. The optimal parameters obtained from VaNSAS were a rotation speed of 2200 rpm, a welding speed of 108.34 mm/min, a tool tilt of 1.23 Deg, a tool pin profile of a hexagon, and a rotational direction of clockwise.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.