The development of high-performance volatile organic compound (VOC) sensor based on a p-type metal oxide semiconductor (MOS) is one of the important topics in gas sensor research because of its unique sensing characteristics, namely, rapid recovery kinetics, low temperature dependence, high humidity or thermal stability, and high potential for p-n junction applications. Despite intensive efforts made in this area, the applications of such sensors are hindered because of drawbacks related to the low sensitivity and slow response or long recovery time of p-type MOSs. In this study, the VOC sensing performance of a p-type MOS was significantly enhanced by forming a patterned p-type polycrystalline MOS with an ultrathin, high-aspect-ratio (∼25) structure (∼14 nm thickness) composed of ultrasmall grains (∼5 nm size). A high-resolution polycrystalline p-type MOS nanowire array with a grain size of ∼5 nm was fabricated by secondary sputtering via Ar(+) bombardment. Various p-type nanowire arrays of CuO, NiO, and Cr2O3 were easily fabricated by simply changing the sputtering material. The VOC sensor thus fabricated exhibited higher sensitivity (ΔR/Ra = 30 at 1 ppm hexane using NiO channels), as well as faster response or shorter recovery time (∼30 s) than that of previously reported p-type MOS sensors. This result is attributed to the high resolution and small grain size of p-type MOSs, which lead to overlap of fully charged zones; as a result, electrical properties are predominantly determined by surface states. Our new approach may be used as a route for producing high-resolution MOSs with particle sizes of ∼5 nm within a highly ordered, tall nanowire array structure.

Microwave plasma chemical vapor deposition (MPCVD) was employed to synthesize high quality centimeter scale graphene film at low temperatures. Monolayer graphene was obtained by varying the gas mixing ratio of hydrogen and methane to 80:1. Using advantages of MPCVD, the synthesis temperature was decreased from 750 °C down to 450 °C. Optical microscopy and Raman mapping images exhibited that a large area monolayer graphene was synthesized regardless of the temperatures. Since the overall transparency of 89% and low sheet resistances ranging from 590 to 1855 Ω∕sq of graphene films were achieved at considerably low synthesis temperatures, MPCVD can be adopted in manufacturing future large-area electronic devices based on graphene film.

One of the most interesting topics in physical science and materials science is the creation of complex wrinkled structures on thin-film surfaces because of their several advantages of high surface area, localized strain, and stress tolerance. In this study, a significant step was taken toward solving limitations imposed by the fabrication of previous artificial wrinkles. A universal method for preparing hierarchical three-dimensional wrinkle structures of thin films on a multiple scale (e.g., nanometers to micrometers) by sequential wrinkling with different skin layers was developed. Notably, this method was not limited to specific materials, and it was applicable to fabricating hierarchical wrinkles on all of the thin-film surfaces tested thus far, including those of metals, two-dimensional and one-dimensional materials, and polymers. The hierarchical wrinkles with multiscale structures were prepared by sequential wrinkling, in which a sacrificial layer was used as the additional skin layer between sequences. For example, a hierarchical MoS wrinkle exhibited highly enhanced catalytic behavior because of the superaerophobicity and effective surface area, which are related to topological effects. As the developed method can be adopted to a majority of thin films, it is thought to be a universal method for enhancing the physical properties of various materials.

The direct transfer method of large area monolayer CVD graphene from Cu foil to various substrates such as PET, PDMS, and glass is developed using mechano-electro-thermal forces based on ultraconformal contact without any metal etching process or additional carrier layers in a solid-state process. Transferred graphene presents both excellent quality (with no residues, few defects, or no folding) and remarkable mechanical and electrical stability.

Human neural stem cells (hNSCs) can alter their fate choice in response to the biophysical cues provided during development. In particular, it has been reported that the differentiation of neural stem cells (NSCs) is enhanced by anisotropic contact, which facilitates focal adhesion (FA) formation and cytoskeletal organization. However, a biomolecular mechanism governing how the cells process the biophysical cues from these anisotropic geometries to their fate commitment is still poorly understood due to the limited availability of geometrical diversities (contact width above 50 nm) applicable to cell studies. Here, we firstly demonstrate that the biomolecular mechanism for enhanced neurogenesis on an anisotropic nanostructure is critically dependent on the resolution of a contact feature. We observed a totally different cellular response to anisotropic geometries by first utilizing a high-resolution nanogroove (HRN) structure with an extremely narrow contact width (15 nm). The width scale is sufficiently low to suppress the integrin clustering and enable us to elucidate how the contact area influences the neurogenesis of hNSCs at an aligned state. Both the HRN and control nanogroove (CN) pattern with a contact width of 1 μm induced the spontaneous topographic alignment of hNSCs. However, intriguingly, the focal adhesion (FA) formation and cytoskeletal reorganization were substantially limited on the HRN, although the cells on the CN showed enhanced FA formation compared with flat surfaces. In particular, the hNSCs on the HRN surface exhibited a strikingly lower fraction of nuclear yes-associated protein (YAP) than on the CN surface, which was turned out to be regulated by Rho GTPase in the same way as the cells sense the mechanical properties of the environment. Considering the previously reported role of YAP on neurogenesis, our finding newly substantiates that YAP and Rho GTPase also can be transducers of hNSCs to process topographical alternation to fate decision. Furthermore, this study with the unprecedented high-resolution nanostructure suggests a novel geometry sensing model where the functional crosstalk between YAP signaling and Rho GTPase integrally regulate the fate commitment of the hNSCs.