No abstract

No abstract

No abstract

Dynamic simulation provides an efficient approach for improving the efficiency of parabolic trough power plants and control circuits. In the dynamic simulation, the possibilities and operating conditions of the plant are evaluated regarding materials, processes, emissions, or economics. Several studies related to the dynamic simulation of the parabolic trough technology are summarised and discussed in this work. This study is the first research that presents a thorough description of the advanced control circuits used in the solar field and thermal storage system of a parabolic trough power plant. This power plant was implemented using advanced process simulation software (APROS). The dynamic model was built based on the real specifications of the power plant.

No abstract

The present work focuses on the development of a detailed dynamic model of an existing parabolic trough solar power plant (PTSPP) in Spain. This work is the first attempt to analyse the dynamic interaction of all parts, including solar field (SF), thermal storage system (TSS) and power block (PB), and describes the heat transfer fluid (HTF) and steam/water paths in detail. Advanced control circuits, including drum level, economiser water bypass, attemperator and steam bypass controllers, are also included. The parabolic trough power plant is modelled using Advanced Process Simulation Software (APROS). An accurate description of control structures and operation strategy is necessary in order to achieve a reasonable dynamic response. This model would help to identify the best operation strategy due to DNI (direct normal irradiation) variations during the daytime. The operation strategy used in this model has also been shown to be effective compared to decisions made by operators on cloudy periods by improving power plant performance and increasing operating hours.

This work aims to define the microstructure and to study the mechanical properties of an Al matrix incorporated with various amounts of Fe2O3 (3, 6, 9, 12 and 15 wt.%) with a constant amount of Ag at 1 wt.%. Al/Fe2O3 + Ag hybrid nano-composite samples are manufactured using powder metallurgy. An aluminum matrix is considered an important alloy, owing to its properties such as being lightweight, strong and corrosion and wear resistant, which enable it to be used in many applications, such as electronics, aerospace and automotive purposes. Various examinations have been performed for the samples of this work, such as Field Emission Scanning Electron Microscopy (FESEM) and X-ray Diffraction (XRD) analysis to estimate the microstructure and phases of manufactured nano-composites. Mechanical testing is also carried out, such as micro-hardness testing, compressive testing and wear testing, to estimate the mechanical properties of the hybrid nano-composites. The results of FESEM and XRD demonstrate that Fe2O3 and Ag nanoparticles are uniformly distributed and dispersed into the Al matrix, whereas the mechanical tests show that enhancement t micro-hardness, compressive strength of 12 wt.% Fe2O3 + 1Ag and wear rate decrease to a minimum value of 12 wt.% of Fe2O3 + 1Ag.

Features of the tubular type of heat exchanger were examined experimentally in the current study. A rig is fitted with a novel insert as a negative heat transfer increase technique. The core fluid used is air under steady heat flux and a turbulent discharge state (6000 ≤ Re ≤ 19,500) conditions. Two heat transfer augmentation inserts are employed; one is the basket turbulators utilized as a turbulator and placed inside the heat exchanger with a constant pitch ratio (PR = 150 mm), and the other is the basket turbulators together with twisted tape that are installed at the core of the basket turbulators. The measurements illustrated that the Nusselt number (Nu) was found to be higher by about 131.8%, 169.5%, 187.7%, and 206.5% in comparison with the plain heat exchanger for basket turbulators and the combined basket–twisted tape inserts with y/w = 6, 3, and 2, respectively. The highest thermal efficiency factor of the increased tubular heat exchanger is 1.63 times more elevated than that of the simple heat exchanger on average, due to a binary basket-quirky strip for a twisting percentage y/w equal to 2 under steady pumping energy. Further, practical correlations for the Nusselt number, as well as friction characteristics, were established and presented.