A structural classification method of vibro-impact systems with an arbitrary finite number of degrees of freedom based on the principles given by Blazejczyk-Okolewska et al. [Blazejczyk-Okolewska B., Czolczynski K., Kapitaniak T., Classification principles of types of mechanical systems with impacts -fundamental assumptions and rules, European Journal of Mechanics A/Solids, 2004, 23, pp. 517-537] has been proposed. We provide a characterization of equivalent mechanical systems with impacts expressed in terms of a new matrix representation, introduced to formulate the notation of the relations occurring in the system. The developed identification and elimination procedures of equivalent systems and an identification procedure of connected systems enable determination of a set of all structural patterns of vibro-impact systems with an arbitrary finite number of degrees of freedom.
This paper analyses the possibility of using tannery shavings as a basis for new composite materials with specified properties. The new material was made by combining tannery shavings with an adhesive medium. Mineral additives, such as dolomite, kaolin and bentonite were used in an amount of 5% and 10% of the total mass of shavings as a filler. In order to point out the influence of mineral additives on the final composite structure, some physico–mechanical properties, such as tensile strength and elasticity were examined with the use of static tensile tests. The second part of the investigation involved the analysis of wetteability by immersion, because this property depends on several aspects, such as surface roughness and the material structure. Thus, changes in wetteability values can provide information about the impact of mineral additives on the material properties of composites. With regard to physico–mechanical and sorption properties obtained on the basis of experimental results, it was possible to define areas of possible applications of these materials in comparison with current methods.
The research presented in this paper focuses on determination of the physical and mechanical properties of composites made on the basis of natural polymer, i.e., crushed collagen fibres which are waste from the leather industry. Mineral supplements such as dolomite, bentonite and kaolin were the filling of the composite produced. Their application was dictated by increasing the application range, and we strove to optimise the composition of the composite in terms of physical and mechanical properties determined in static tensile tests. An analysis of the water absorption capacity was also carried out in order to select optimal compositions which have the best properties. The test results indicate extensive application possibilities of the composites produced, one of which is in footwear insoles, whose quality is an important element determining the hygienic qualities of shoes due to the high density of sweat glands in the plantar part of the foot. This research indicates the possibility of individual development of the composite properties of collagen fibres and mineral supplements in terms of their application, taking into account the medical aspect.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.