The mechanical properties of cast metallic materials are strongly influenced by processing parameters, such as percentage of silicate, sand granulometry, and metallurgical processing. The ductile iron cast produced by the CO2 process depends on variables that determine the behavior of the material in service, such as the cooling rate and chemical composition. This study evaluated the influence of the cooling rate on the spheroidic graphite. In order to determine this effect, a simulation was performed in specimens with 20, 25, and 30 mm in thickness, through the characterization of type, measurement of nodule size, and distribution of nodules. Chemical analysis and mechanical resistance tests were performed. The 25 mm thick specimen showed the best behavior among the three thicknesses evaluated, presenting the formation of many small nodules and a small amount of larger nodules in the center.
A viabilidade da produção de biodiesel com a utilização de matérias-primas de maior acidez e baixo custo acarretam um aumento do custo de investimento do processo devido à necessidade de utilizar equipamentos construídos com aços especiais importados. As tubulações e seus equipamentos encontram-se sujeitos aos processos de corrosão por características da interação química com o fluido interno, interação com o ambiente da instalação, oxidação devido às altas temperaturas, ou combinações de processos simultâneos. A seleção de materiais que apresentem compatibilidade entre si e com o fluido do processo, além de propriedades mecânicas apropriadas é de fundamental importância, sendo necessário o estudo de caracterização de ligas e suas taxas de corrosão em função de aplicações específicas. Este artigo teve como objetivo avaliar a resistência a corrosão do aço microligado API X70, um material nacional e de menor custo quando comparado aos aços importados, em contato com biodiesel de girassol. Além disso, também foi investigada a influência da acidez do biodiesel na corrosão do aço testado. Os resultados obtidos sugerem que o biodiesel de girassol pode criar uma barreira protetiva chamada de biofilme sobre a superfície do aço microligado após um tempo de contato, causando uma redução da taxa de corrosão. Após trinta dias de contato com o biodiesel, um aumento significativo na taxa de corrosão do aço foi observado, provavelmente causado pela ruptura do biofilme.
ResumoOs aços API com classificação X52 são considerados aços alta resistência baixa liga (ARBL). Estes materiais possuem como principais características a elevada resistência mecânica, tenacidade e boa soldabilidade. Os aços API são muito utilizados para a produção de tubulações que realizam o transporte de água, petróleo, gás e derivados. A produção dos tubos envolve processos de soldagem, que podem provocar mudanças na microesturura do material. Dessa forma, pesquisas são realizadas com o objetivo de investigar a relação entre o processo de soldagem com a microestrutura e a resistência mecânica do material. Este trabalho tem como objetivo comparar dois processos de soldagem: GTAW (Gas Tungsten Arc Welding) e o SMAW (Shielded Metal Arc Welding), a fim de verificar a relação entre os diferentes processos e a microestrutura da junta soldada. Foram realizadas observações da macro e da micro estrutura. Verificou-se que a amostra soldada pelo processo GTAW apresentou uma microestutura com maior número de fases. Palavras-chave: Aço API; Soldagem; Microestrutura. EFFECT OF DIFFERENTS WELDINGS PROCESS IN API X52 STEEL MICROSTRUCTURE AbstractAPI steels classified as X52 are considered high strength low alloy steels (HSLA). These materials have as main characteristics the high mechanical resistance, toughness and good weldability. API steels are widely used API steels are widely used to transport water, oil, natural gas and derivatives. The production of the tubes involves welding processes, which can cause changes in the microstructure of the material. In this way, researches are carried out with the objective of investigating the relationship between the welding process, the microstructure and the mechanical strength of the material. This work aims to compare two welding processes: GTAW (Gas Tungsten Arc Welding) and SMAW (Shielded Metal Arc Welding), to verify the relationship between the different processes and the microstructure of the welded joint. Macro and micro structure observations were made. It was verified that the sample welded by the GTAW process has presented a microestuture with greater number of phases.
Resumo Os aços inoxidáveis são normalmente aplicados em ambientes de elevada agressividade devido à combinação de propriedades, tais como resistência mecânica e química. Os aços duplex são um tipo especial de aços inoxidáveis que devido à sua microestrutura bifásica apresentam propriedades que possibilitam sua aplicação em diferentes meios: indústria química, petroquímica, de petróleo e gás, nuclear entre outras. Contudo, devido a condições operacionais e de processo podem acarretar na formação de fases/precipitados (, nitretos, carbetos etc). A fase sigma (), é considerada uma das principais responsáveis pela diminuição das propriedades mecânicas e da resistência à corrosão dos aços duplex. Considerando a importância da aplicação dos aços duplex, muitos trabalho podem ser encontrados na literatura acerca da relação entre a temperatura e a precipitação dessas fases,. Dessa forma este trabalho tem como objetivo realizar uma avaliação do efeito da velocidade de resfriamento sobre a microestrutura e a resistência à corrosão do aço duplex em meio ácido. Palavras-chave: Aço duplex; Microestrutura; Corrosão EVALUATION OF THE COOLING SPEED ON THE MICROSTRUCTURE AND CORROSION RESISTANCE OF A DUPLEX STEEL Abstract Stainless steels are usually applied in environments of high aggressiveness due to the combination of properties such as mechanical and chemical resistance. Duplex steels are a special kind of stainless steels that, due to their biphasic microstructure, have properties that allow their application in different environments: chemical, petrochemical, oil and gas, and nuclear industries. However, due to operational and process conditions, the formation of precipitates (, nitrides, carbides, etc.) may occur. The sigma phase () is one of the main factors responsible for the reduction of the mechanical properties and corrosion resistance of duplex steels. Considering the importance of duplex steels aplications, many papers can be found in the literature on the relationship between temperature and precipitation of these phases. In this way, this work aims to evaluate the effect of the cooling rate on the microstructure and the corrosion resistance of the duplex steel in the acid medium.
Os metais e ligas metálicas encontram-se entre os materiais mais utilizados no meio industrial, com amplas aplicações em automobilística, petróleo e gás, naval, etc. Devido à interação com o meio, muitas vezes agressivo, esses materiais estão sujeitos à corrosão que afeta o desempenho e causam prejuízos econômicos e ambientais. Assim, é fundamental o uso de métodos para inibir ou minimizar a corrosão, que sejam também ambientalmente amigáveis, destacando-se nesse sentido os revestimentos inorgânicos (filmes) obtidos por sol-gel. Esses filmes apresentam estabilidade química e térmica e excelentes propriedades de barreira que possibilitam seu uso como revestimento anticorrosivo. Neste sentido, este trabalho tem como objetivo revisar conceitos e trabalhos científicos sobre esse tema mostrando sua importância e as dificuldades ainda enfrentadas.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.