We demonstrate a composite medium, based on a periodic array of interspaced conducting nonmagnetic split ring resonators and continuous wires, that exhibits a frequency region in the microwave regime with simultaneously negative values of effective permeability &mgr;(eff)(omega) and permittivity varepsilon(eff)(omega). This structure forms a "left-handed" medium, for which it has been predicted that such phenomena as the Doppler effect, Cherenkov radiation, and even Snell's law are inverted. It is now possible through microwave experiments to test for these effects using this new metamaterial.

We present the design for an absorbing metamaterial (MM) with near unity absorbance A(omega). Our structure consists of two MM resonators that couple separately to electric and magnetic fields so as to absorb all incident radiation within a single unit cell layer. We fabricate, characterize, and analyze a MM absorber with a slightly lower predicted A(omega) of 96%. Unlike conventional absorbers, our MM consists solely of metallic elements. The substrate can therefore be optimized for other parameters of interest. We experimentally demonstrate a peak A(omega) greater than 88% at 11.5 GHz.

{The development of artificially structured electromagnetic materials, termed metamaterials, has led to the realization of phenomena that cannot be obtained with natural materials 1 . This is especially important for the technologically relevant terahertz (1 THz 5 10 12 Hz) frequency regime; many materials inherently do not respond to THz radiation, and the tools that are necessary to construct devices operating within this range-sources, lenses, switches, modulators and detectors-largely do not exist. Considerable efforts are underway to fill this 'THz gap' in view of the useful potential applications of THz radiation [2][3][4][5][6][7] . Moderate progress has been made in THz generation and detection 8 ; THz quantum cascade lasers are a recent example 9 . However, techniques to control and manipulate THz waves are lagging behind. Here we demonstrate an active metamaterial device capable of efficient real-time control and manipulation of THz radiation. The device consists of an array of gold electric resonator elements (the metamaterial) fabricated on a semiconductor substrate. The metamaterial array and substrate together effectively form a Schottky diode, which enables modulation of THz transmission by 50 per cent, an order of magnitude improvement over existing devices 10 . A great deal of research into metamaterials has used microwave radiation; this is in part due to the ease of fabrication of sub-wavelength structures at these frequencies. Indeed, negative refractive index media 11,12 composed of negative permittivity 13 (e 1 , 0) and negative permeability 14 (m 1 , 0) metamaterial elements was first demonstrated at microwave frequencies. This has led to intense theoretical, computational and experimental studies of exotic phenomena, such as perfect lensing 15 and cloaking 16,17 . Recently, researchers have ventured to create functional metamaterials at near-infrared and visible frequencies [18][19][20] . Considerably less work has concentrated on THz frequencies 21,22 . However, the design flexibility associated with metamaterials provides a promising approach, from a device perspective, towards filling the THz gap.Metamaterials are geometrically scalable, which translates to operability over many decades of frequency. This engineering tunability is in fact a distinguishing and advantageous property of these materials. However, for many applications it is desirable to have real-time tunability. For instance, short-range wireless THz communication or ultrafast THz interconnects 23,24 require switches and modulators. Current state-of-the-art THz modulators based on semiconducting structures have the desirable property of being broadband, which is of relevance to THz interconnects, but are only able to modulate a few per cent 10 and usually require cryogenic temperatures 25 . Therefore, further improvement of the performance characteristics are required for practical applications. Here we present an efficient active metamaterial switch/modulator operating at THz frequencies. Although the modulation is based...

The advent of negative index materials has spawned extensive research into metamaterials over the past decade. Metamaterials are attractive not only for their exotic electromagnetic properties, but also their promise for applications. A particular branch–the metamaterial perfect absorber (MPA)–has garnered interest due to the fact that it can achieve unity absorptivity of electromagnetic waves. Since its first experimental demonstration in 2008, the MPA has progressed significantly with designs shown across the electromagnetic spectrum, from microwave to optical. In this Progress Report we give an overview of the field and discuss a selection of examples and related applications. The ability of the MPA to exhibit extreme performance flexibility will be discussed and the theory underlying their operation and limitations will be established. Insight is given into what we can expect from this rapidly expanding field and future challenges will be addressed.

In this Letter we demonstrate, for the first time, selective thermal emitters based on metamaterial perfect absorbers. We experimentally realize a narrow band midinfrared (MIR) thermal emitter. Multiple metamaterial sublattices further permit construction of a dual-band MIR emitter. By performing both emissivity and absorptivity measurements, we find that emissivity and absorptivity agree very well as predicted by Kirchhoff's law of thermal radiation. Our results directly demonstrate the great flexibility of metamaterials for tailoring blackbody emission.

We show that magnetic response at terahertz frequencies can be achieved in a planar structure composed of nonmagnetic conductive resonant elements. The effect is realized over a large bandwidth and can be tuned throughout the terahertz frequency regime by scaling the dimensions of the structure. We suggest that artificial magnetic structures, or hybrid structures that combine natural and artificial magnetic materials, can play a key role in terahertz devices.

Plasmon-induced near-infrared electrochromism based on transparent conducting nanoparticles: Approximate performance limits Appl. Phys. Lett. 101, 071903 (2012) Quantum mechanical study of plasmonic coupling in sodium nanoring dimers Appl. Phys. Lett. 101, 061906 (2012) Strong two-photon fluorescence enhanced jointly by dipolar and quadrupolar modes of a single plasmonic nanostructure Appl.High absorption efficiency is particularly desirable at present for various microtechnological applications including microbolometers, photodectors, coherent thermal emitters, and solar cells.Here we report the design, characterization, and experimental demonstration of an ultrathin, wide-angle, subwavelength high performance metamaterial absorber for optical frequencies.Experimental results show that an absorption peak of 88% is achieved at the wavelength of ϳ1.58 m, though theoretical results give near perfect absorption.

We present a metamaterial that acts as a strongly resonant absorber at terahertz frequencies. Our design consists of a bilayer unit cell which allows for maximization of the absorption through independent tuning of the electrical permittivity and magnetic permeability. An experimental absorptivity of 70% at 1.3 terahertz is demonstrated. We utilize only a single unit cell in the propagation direction, thus achieving an absorption coefficient alpha = 2000 cm(-1). These metamaterials are promising candidates as absorbing elements for thermally based THz imaging, due to their relatively low volume, low density, and narrow band response.