Resumo Aços microligados expostos a ambientes contendo H2S e CO2 (sour gas) sofrem corrosão generalizada que promovem a entrada de hidrogênio atômico no metal, causando fragilização por hidrogênio, podendo gerar falhas graves no material. O objetivo deste trabalho é estudar o grau de fragilização, utilizando ensaio Charpy, de um tubo API 5L X65 após diferentes tempos de imersão em uma solução saturada com H2S. O eletrólito empregado foi solução A (ácido acético contendo cloreto de sódio) da norma NACE TM0284-2011, fazendo-se purga com N2 e injeções de H2S. Os corpos de prova padronizados foram imersos durante 96 e 360 horas, sendo que após doze dias do término da imersão, foram realizados os ensaios Charpy. Foram levantadas as curvas da energia absorvida em função da temperatura, para corpos de prova com e sem imersão. Os resultados mostraram que mesmo após imersão, não houve modificação significativa na temperatura de transição do material, apenas uma pequena diminuição da energia absorvida. Esse comportamento sugere que o teor de hidrogênio em solução sólida aumentou em função do tempo de imersão, levando a tais resultados. O refinamento da microestrutura e o baixo nível de inclusões estão relacionados a baixa quantidade e uniformidade da distribuição dos sítios de ancoramento de hidrogênio irreversível, o que pode explicar o desempenho obtido. Palavras-chave: Charpy; API X65; H2S; Solução A.
Processos de deformação plástica modificam o comportamento à fadiga dos aços inoxidáveis. A combinação desse efeito com um meio corrosivo pode afetar o comportamento frente à corrosãofadiga do material. Isso ocorre por meio de interações entre o meio e a superfície do material deformado, particularmente com as bandas de escorregamento, inclusões e defeitos superficiais que, simultaneamente com o carregamento cíclico, levam à quebra do filme passivo. É esperado que diferentes sentidos de deformação plástica uniaxial apresentem diferentes efeitos no comportamento à corrosão-fadiga, uma vez que a extensão das interações superficiais é diferente em cada caso. Nesse estudo, o efeito da deformação plástica uniaxial em dois sentidos, de tração e de compressão, na resistência à corrosão-fadiga do aço inoxidável ISO 5832-1, material usado em implantes ortopédicos de fixação interna, do tipo placa óssea, foi investigado. Corpos de prova foram submetidos a deformação plástica em compressão ou em tração e, depois, a um condicionamento prévio seguido do ensaio de corrosão-fadiga. Os testes de corrosão-fadiga foram realizados com circulação de dois meios corrosivos. O primeiro meio consistiu em uma solução PBS com 0,9 % em massa de NaCl em água deionizada (pH neutro). O segundo meio de solução com 0,9% de NaCl, 1% H2O2 e 1% Albumina (pH 3), todas as porcentagens em massa. Os dois meios foram utilizados na temperatura de 37 ± 1 o C. Amostras como recebidas (sem deformação uniaxial) no estado solubilizado também foram ensaiadas para comparação com as amostras deformadas. Os ensaios com a solução PBS não produziram corrosão por pite e a deformação plástica, seja em tração ou compressão, aumentou a resistência à corrosão-fadiga, comparadas ao material isento de deformação plástica. Todavia, na solução com cloreto de sódio, H2O2 e albumina (pH 3), houve redução da resistência à corrosão-fadiga em todas as condições de teste, comparando-se ao uso da solução PBS. Esse efeito foi mais pronunciado para os corpos de prova previamente deformados plasticamente por tração em comparação aos deformados por compressão. A exposição a esta solução promoveu pites de corrosão no carregamento cíclico que atuaram como concentradores de tensão e, consequentemente, aceleraram a falha por corrosão-fadiga. Palavras-chave: implantes; biomateriais; corrosão-fadiga; deformação plástica uniaxial, aço inoxidável.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.