The purpose of this study was to isolate starch from the tubers of Cyperus esculentus L. and evaluate its physicochemical and binder properties. Extraction of starch using sodium metabisulfite yielded 37 g of starch per 100 g of the tubers. Scanning electron microscopy indicated that Cyperus starch consists of oval to elliptical particles with a smooth surface. Cyperus starch demonstrates a narrow particle size distribution with a mean of 8.25 μm. Cyperus starch conforms well to United States Pharmacopeia standards established for widely used starches like maize and potato. The X-ray powder diffraction pattern and moisture sorption profile of Cyperus starch were comparable to that of maize starch. Cyperus starch had lower swelling power than maize and potato starch, indicative of stronger associative forces within the granules. Carr's index and Hausner ratio indicate that Cyperus starch should have comparable flow properties with respect to maize and potato starch. Cyperus starch was employed as binder for the formulation of metronidazole tablets. Formulations containing 5%, 7.5%, and 10% Cyperus starch were compared with those containing 10% potato starch. At 10% binder concentration, the tablets containing Cyperus starch exhibited better hardness and negligible friability as compared with those with potato starch. Although the binder concentration had a significant effect on the disintegration time of the tablets, it did not seem to affect the dissolution profile. These results indicate that Cyperus starch provides excellent binding properties without compromising drug release characteristics and should be explored in pharmaceutical formulations.

No abstract

The purpose of this study was to elucidate functional properties of starch granules obtained from tubers of Tacca leontopetaloides and compare them to a commercially available maize starch. Scanning electron microscopy (SEM), particle size analysis, Xray powder diffraction (XRPD), gravimetric moisture sorption, and differential scanning calorimetry (DSC) were used to characterize the samples. Tacca starch exhibited a monomodal distribution of irregularly shaped granules with a mean particle size of 2.64 mm. The spherulites of both samples indicated an A-type pattern, with the degree of crystallinity estimated to be 35% for tacca starch and 38% for maize starch. The moisture sorption profile of both samples was analyzed according to the Guggenheim, Anderson and de Boer (GAB) equation. GAB analysis estimated the monolayer coverage for tacca and maize starch to be 0.0928 g/g and 0.0856 g/g, respectively. The gelatinization parameters of tacca starch were found to be 65.57 -68.56 -73.107C while that of maize starch were 67.30 -70.97 -76.257C. The results of DSC studies indicate that the associative forces that stabilize the granule structure in tacca starch are weaker than those in maize starch. The results obtained in this study establish the fundamental characteristics of tacca starch and suggest that further exploration of its potential for use in a variety of fields is warranted.

No abstract

The purpose of this research was to investigate the interaction of water with ethylcellulose samples and assess the effect of particle size on the interaction. The distribution of water within coarse particle ethylcellulose (CPEC; average particle size 310 micro m) and fine particle ethylcellulose (FPEC; average particle size 9.7 micro m) of 7 cps viscosity grade was assessed by differential scanning calorimetry (DSC) and dynamic vapor sorption analysis. The amounts of nonfreezing and freezing water in hydrated samples were determined from melting endotherms obtained by DSC. An increase in water content resulted in an increase in the enthalpy of fusion of water for the two particle size fractions of EC. The amount of nonfreezable water was not affected by the change in particle size at low water contents. Exposure of ethylcellulose to water for 30 minutes is sufficient to achieve equilibration within the hydrated polymer at 47% wt/wt water content. The moisture sorption profiles were analyzed according to the Guggenheim-Anderson-de Boer (GAB) and Young and Nelson equations, which can help to distinguish moisture distribution in different physical forms. The amount of externally adsorbed moisture was greater in the case of FPEC. Internally absorbed moisture was evident only with the CPEC. In light of these results, an explanation is offered for the success of FPEC in wet-granulation methods where CPEC was not successful.

No abstract

No abstract

No abstract