Different cassava varieties are available in Liberia, but there is little knowledge of their product suitability. Hence, the need to assess the potentials of these varieties to produce gari and fufu flour. The two products from ten improved and two local cassava varieties were characterized based on their yield and chemical, pasting and functional properties using standard methods. The results showed that TMS 96/0097 (gari 27.54%) and Butter cassava (fufu flour 27.35%) have the highest percentage yields. The starch content was higher in gari produced from TMS98/0505 (92.00%) and lower from TMS95/0289 (82.62%); the fufu flour starch content was higher in TMS98/0505 (90.59%) and lower in Bassa girl (84.75%). Gari and fufu flour produced from TMS96/0097 (507.38 RUV) and TMS00/0357 (506.04 RVU) had the highest final viscosity, and the products from TMS95/0289 (338.46 RVU and 336.80 RVU) had the least. The highest swelling power was found in gari (12.74%) and fufu flour (13.55%) produced from TMS92/0057 and the lowest in TMS91/0416 gari (8.23%) and TMS01/1235 fufu flour (8.31%). All the samples may form a paste below the boiling point of water (100°C) at < 7 min. However, cassava varieties and the interactions between varieties and locations had a significant (P < 0.05) effect on the properties of the products: Chemical (except ash content), pasting (except pasting temperature) and functional. Therefore, all the varieties may be suitable for gari and fufu flour production based on the quality preferred by the consumers.

Cassava is a staple mostly eaten in the form of gari, after rice in Liberia. The local method of gari processing often leads to product contamination, thus, a study was done to assess the heavy metals and microbial contamination of gari in eight counties of the country. A total of sixty‐one gari samples were collected and packaged in an airtight polyethylene bag for analyses, using standard methods. Results depict that the mean of the heavy metals in the gari samples is iron (Fe) 43.87 ppm, copper (Cu) 0.94 ppm, zinc (Zn) 5.49 ppm and aluminum (Al) 257.45 ppm. Yellow gari had the highest Fe (64.90 ppm), Cu (1.25 ppm) and Zn (7.85 ppm) content, but with the least Al content (87.15 ppm). The Fe content was lower in groundnut‐fortified gari (42.93 ppm), and the Cu (0.70 ppm) and Zn (3.50 ppm) content were lower in groundnut‐moringa‐fortified gari. The samples and counties have no significant statistical effect (p > .05) on the heavy metals composition of the products. No microbial growth was observed in groundnut‐fortified and groundnut‐moringa‐fortified gari but with coconut‐fortified gari having the highest total fungi count of 800 CFU/g. The major fungi identified in the gari samples are Penicillium and Aspergillus spps., but with their counts within the regulated level. Therefore, the gari consumed in Liberia are safe except for the high Fe and Al content, which needs to be addressed with the use of unpainted stainless steel materials as food contact surfaces.

The regular use of local cassava varieties and the exclusion of the fermentation step in the processing of gari in Liberia may affect the composition and properties of gari, hence the need to evaluate its chemical composition and functional properties. Gari samples were randomly collected from markets (35) and processing centers (24) in Rivercess, Grand Bassa, Bomi, Margibi, Sinoe, Gbarpolu, Montserrado, and Grand Capemount Counties, and packaged in airtight polythene bags prior to laboratory analyses using standard methods, and the data generated analysed using Statistical Package for Social Scientist (SPSS Version 21). The results showed that the chemical composition of the gari samples is moisture content 6.40%; cyanogenic potential 20.70 mg HC/kg; pH 5.38; starch content 62.05%; fat content 2.77%; ash content 1.20%; total titratable acidity (TTA) 0.01 g/100 mL; and protein content 1.05%. The functional properties of the gari samples is water absorption capacity 525.13%; oil absorption capacity 175.59%; least gelation concentration 6.13%; dispersibility 39.48%; bulk density 65%; swelling power (SWP) 8.04%; and solubility index 14.96%. Peak viscosity is 165.60 RVU; trough viscosity 149.10 RVU; breakdown viscosity 16.50 RVU; final viscosity 251.02 RVU; setback viscosity 101.92 RVU; peak time 6.48 min; and pasting temperature 50.82 °C. All the chemical composition and functional properties were significantly (p &lt; 0.05) affected by the products except for ash, TTA, and protein contents as well as the SWP (p &gt; 0.05). The addition of moringa leaf powder, groundnut paste, roasted coconut chips, and milk powder increased the fat and protein contents of the gari compared to the non-enriched products. Gari of improved quality can be produced in Liberia if the available local cassava varieties with high cyanide content are fermented before roasting or the newly introduced low cyanide varieties are used for gari production with the stipulated standard operating procedures

Cassava is produced by more than 80% of farming households and is an important contributor to gross domestic product (GDP) in Liberia. It is therefore important to assess the status of cassava processing into food and other products. A total of one hundred and sixty (160) well-structured questionnaires were used for the collection of information from eight counties, with twenty respondents from each county. It was found out that all the counties lack adequate modern cassava processing machines, with almost all cassava processing operations being done with rudimentary equipment. Gari and wet fufu are common products in Liberian markets, with no high-quality cassava flour (HQCF) or derivatives. Consequently, user and gender friendly processing machines were installed in six established modern cassava processing centres, and new cassava products, such as fufu powder, tapioca, and HQCF with its value-added products (10% bread and pastries), were introduced. This upscaling will enhance the cassava value chain in Liberia with improvement in livelihoods, especially for vulnerable women and unemployed youth.