This study aims to fabricate and characterize the hybrid composites of duck eggshell (DE) and abaca fiber reinforced epoxy. The composites were fabricated with 20 vol.% fillers consisting of DE/abaca fiber with ratios of 0/20, 5/15, 10/10, and 20/0. We then characterized their mechanical (tensile and flexural) and water absorption properties. At the same time, the characteristics of eggshell particles were examined by SEM/EDS and XRD. We observed that the DE contains higher CaCO3 than chicken eggshells, making it appropriate to be chosen as a filler. The alkali-treated (AT) abaca improves the flexural and tensile strengths of abaca/epoxy composite but slightly decreases those of DE/AT abaca/epoxy composites. The composite with a 5/15 DE/AT abaca fiber ratio shows the maximum flexural strength. However, the flexural strength of the composites made of the epoxy matrix is almost the same as that of polyester and is 21% lower than that of PMMA. The use of polyester and PMMA matrixes significantly reduces the water absorption rate to around 3.50%.
Limbah serbuk gergaji di berbagai daerah yang saat ini semakin bertambah, memerlukan penanganan yang efektif untuk dapat diolah menjadi produk yang bermanfaat bagi masyarakat. Melalui Program Pengembangan Desa Mitra (PPDM) yang didanai oleh Universitas Muhammadiyah Yogyakarta (UMY), limbah serbuk gergaji halus yang diperoleh pengusaha Syifa Meuble Kecamatan Mungkid, Kabupaten Magelang telah diolah menjadi meuble hibrid dalam bentuk meja makan untuk pasien di rumah sakit atau klinik. Meja dibuat dengan gerakan yang fleksibel untuk memudahkan pasien. Fabrikasi meubel (meja) hibrid dilakukan menggunakan teknologi komposit hibrid, yaitu limbah serbuk gergaji dengan fraksi berat 30% dikombinasikan dengan limbah serbuk cangkang telur ayam yang diperoleh dari pengusaha roti (10% berat) sebagai bahan pengisi, dan epoxy resin (60% berat) sebagai bahan pengikat/matriks. Sebelum dibuat menjadi meja yang berdimensi (64 cm x 36 cm x 3 cm), perlu dilakukan salah satu pengujian sifat mekanis terhadap bahan komposit tersebut, yaitu uji bending untuk mengetahui sifat lenturnya. Hasil uji sifat lentur menunjukkan bahwa penambahan 10% berat cangkang telur pada komposit serbuk gergaji/epoxy sedikit meningkatkan regangan lentur dan kekakuan papan komposit, masing-masing sekitar 4%. Produk papan komposit serbuk gergaji/epoxy dan komposit hibrid serbuk gergaji/serbuk cangkang telur/epoxy menunjukkan kerapatan yang lebih tinggi dibandingkan papan partikel yang ada di pasaran. Hal ini memberikan nilai positif yang berpotensi untuk dikembangkan menjadi produk meja hibrid yang berkualitas untuk aplikasi meja pasien yang fleksibel.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.