In order to improve the initial color and the long-term heat stability of super-transparent polyvinyl chloride (PVC), a series of composite heat stabilizers consisting of unsaturated Zn oleate and uracil derivatives have been designed in this paper. The uracil derivatives are 1,3-dimethyl-6-amino-uracil (DAU) and 6,6′-diamino-1,1′,3,3′-tetramethyl-5,5′-(ethylidene)bisuracil (OSU). The static thermal stability, dynamic thermal stability, and transparency were used to evaluate the properties of the stabilized transparent PVC sheets. The results indicate that the compatibility between the stabilizer and PVC was greatly enhanced by introducing an unsaturated long-chain Zn oleate and a long alkyl chain bisuracil derivative. Through the thermal discoloration test, the best ratio of DAU/zinc oleate (DAU/Zn) and OSU/zinc oleate (OSU/Zn) was determined to be 4:1, with a total amount of 3 phr in 100 phr PVC. It was verified that the combination of zinc oleate with uracil derivatives could improve the long-term thermal stability of PVC, and the DAU/Zn was better than that of the OSU/Zn. In addition, through the transmission/haze verification, adding a proper amount of epoxidized soybean oil (ESBO) and phosphite ester to the OSU/Zn system has a certain synergistic effect. The thermal stability and transparency of PVC can be remarkably enhanced.

In recent years, superamphiphobic coatings have been widely used in industrial transportation and environmental treatments because of their unique liquid repellency. In this study, WO3-TiO2 nanorods/SiO2 were used as the constructor of surface microstructures, and 1H,1H,2H,2H-perfluorodecyltriethoxysilane was used as the provider of low surface energy, and a photocatalytic superamphiphobic coating (FTS coating) was prepared. The microstructure and chemical composition of the coating was characterized by scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), Fourier-transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), and thermogravimetric analysis (TGA). The coating exhibited excellent photocatalytic activity toward degradation methyl red and nitric oxide (NO), and the degradation efficiency to NO reached 47.8%. Also, the advanced contact angle and the hysteresis angle of water, glycol, glycerol, and olive oil was used to evaluate the superamphiphobicity. After 7 days of ultraviolet (UV) aging, five cycles of airbrush flushing and 48 h of immersion in acid, salt, and alkali solutions, the FTS coating still exhibits excellent amphiphobicity, which lays a foundation for its large-scale applications in the concrete exterior wall. The surface microstructure and the formation of air pockets are a prerequisite for superamphiphobicity, which promotes the liquid on the coating surface into the Cassie-Baxter state. Furthermore, the formation of air pockets is closely related to the gas adsorption capacity and the specific surface area (S BET) of the surface microstructure on the coating surface. The coatings with different S BET constructed and the advanced contact angle were measured. The influence of air pockets on the superamphiphobicity of coatings was studied in combination with the optical microscope. The understanding that S BET further influences superamphiphobicity by affecting the surface air pockets is proposed.

No abstract

No abstract

In order to improve the deficiency of traditional polyvinyl chloride (PVC) heat stabilizer, triazole-based zinc-containing complex (abbreviated as [Zn(ttr) (OAc)]) with good compatibility with PVC and a strong ability to absorb HCl was prepared in this paper, which was characterized by Fourier transform infrared (FTIR) spectroscopy, scanning electron microscope (SEM) and thermogravimetric analysis (TGA). PVC sheets were prepared by mixing PVC with composite heat stabilizer (DAJ) composed of [Zn(ttr)(OAc)] and 1,3-dimethyl-6-aminouracil (DAU). Different kinds and amounts of common auxiliary heat stabilizers were selected and added to the DAJ system to study the effect of thermally stable system on PVC by Congo red test, Discoloration test, Dynamic thermal stability test, SEM, TGA and Transmittance test and the relevant mechanism was explored. The PVC sheets with DAJ blended by 1.2 phr DAU and 0.8 phr [Zn(ttr)(OAc)] showed relatively excellent coloring properties, long-term thermal stability, and high light transmittance. Compared with dibenzoylmethane (DBM), 0.5 phr sorbitol and 1.5 phr epoxy soybean oil (ESBO)/Antioxidant 168 showed good synergistic effect with DAJ. Due to the polyhydroxy nature of sorbitol, the thermal stability of PVC was significantly improved, and the transmittance of PVC benefited from the similar miscibility of ESBO long chain. This was also confirmed by TGA and SEM of PVC sheet.