In recent years, fiber-reinforced polymer (FRP) composites have been widely used as a new type of high-performance material in concrete structures. FRP composites have the advantages of high strength, light weight, and corrosion resistance. Based on existing studies in the literature, this paper reviews the development and applications of FRP materials for the strengthening and rehabilitation of bridge structures. The types and properties of FRP composites are summarized, and the applications and development of FRP sheets, FRP bars, FRP grids, and prestressed FRP tendons for bridge structures are discussed. Different types of FRP composites result in different failure characteristics and bearing capacities. Moreover, this paper covers the FRP strengthening methods and the response properties of the flexural performance, bonding performance, and ductility. Significant conclusions regarding the strengthening/repair of bridge structures with FRP composites are presented. The review details the current state of knowledge and research on strengthening bridge structures with FRP composites and is helpful for better understanding and establishing design criteria.

No abstract

Cross-laminated timber (CLT) is well known as an interesting technical and economical product for modern wood structures. The use of CLT for modern construction industry has become increasingly popular in particular for residential timber buildings. Analyzing the CLT behavior in high thermal environment has attracted scholars’ attention. Thermal environment greatly influences the CLT properties and load bearing capacity of CLT, and the investigation can form the basis for predicting the structural response of such CLT-based structures. In the present work, the finite element method (FEM) is employed to analyze the thermal influence on the deformation of CLT. Furthermore, several factors were taken into consideration, including board layer number, hole conformation, and hole position, respectively. In order to determine the influence, several numerical models for different calculation were established. The calculation process was validated by comparing with published data. The performance is quantified by demonstrating the temperature distribution and structural deformation.

As a common method, external prestressing widely informs rehabilitation in existing structures. This paper presents the total prebending moment calculation of external prestressing with different tendon profiles. Meanwhile, the external prestressing loss and original internal prestressing loss are considered in the calculation in both the theoretical method and the finite element method. Then, we discuss the reinforcement efficiency of different tendons profiles and provide the reinforcement distribution ratio. The results show that the theoretical method is similar to the finite element method, and it can quickly evaluate the reinforcement effect by using different tendon profiles in engineering. By comparing the reinforcement efficiency under different external tendon profiles, the reinforcement scheme is determined according to the local damage and the overall damage of the beam, which effectively decreases the cost of reinforcement.