Room-temperature phosphorescence from metal-free purely organic molecules has recently gained much interest. We devised metal-free organic phosphors by incorporating selenium (Se) to promote spin–orbit coupling by its nonmetal heavy atom effect. The Se-based organic phosphors showed bright phosphorescent emission in organic light-emitting diodes (OLEDs) and photo-excited phosphorescence in an amorphous film state. Large orbital angular momentum change (ΔL) during the electron transition process and heavy atom effect of Se render a PL quantum yield of 0.33 ± 0.01 and a high external quantum efficiency (EQE) of 10.7 ± 0.14% in phosphorescent LEDs. This work demonstrates the rational molecular design of metal-free organic phosphorescent emitters with Se as an alternative novel class of materials to the conventional organometallic phosphors for OLEDs.
Background: Nearly three-quarters of anterior cruciate ligament (ACL) injuries occur as “noncontact” failures from routine athletic maneuvers. Recent in vitro studies revealed that repetitive strenuous submaximal knee loading known to especially strain the ACL can lead to its fatigue failure, often at the ACL femoral enthesis. Hypothesis: ACL failure can be caused by accumulated tissue fatigue damage: specifically, chemical and structural evidence of this fatigue process will be found at the femoral enthesis of ACLs from tested cadaveric knees, as well as in ACL explants removed from patients undergoing ACL reconstruction. Study Design: Controlled laboratory study. Methods: One knee from each of 7 pairs of adult cadaveric knees were repetitively loaded under 4 times–body weight simulated pivot landings known to strain the ACL submaximally while the contralateral, unloaded knee was used as a comparison. The chemical and structural changes associated with this repetitive loading were characterized at the ACL femoral enthesis at multiple hierarchical collagen levels by employing atomic force microscopy (AFM), AFM–infrared spectroscopy, molecular targeting with a fluorescently labeled collagen hybridizing peptide, and second harmonic imaging microscopy. Explants from ACL femoral entheses from the injured knee of 5 patients with noncontact ACL failure were also characterized via similar methods. Results: AFM–infrared spectroscopy and collagen hybridizing peptide binding indicate that the characteristic molecular damage was an unraveling of the collagen molecular triple helix. AFM detected disruption of collagen fibrils in the forms of reduced topographical surface thickness and the induction of ~30- to 100-nm voids in the collagen fibril matrix for mechanically tested samples. Second harmonic imaging microscopy detected the induction of ~10- to 100-µm regions where the noncentrosymmetric structure of collagen had been disrupted. These mechanically induced changes, ranging from molecular to microscale disruption of normal collagen structure, represent a previously unreported aspect of tissue fatigue damage in noncontact ACL failure. Confirmatory evidence came from the explants of 5 patients undergoing ACL reconstruction, which exhibited the same pattern of molecular, nanoscale, and microscale structural damage detected in the mechanically tested cadaveric samples. Conclusion: The authors found evidence of accumulated damage to collagen fibrils and fibers at the ACL femoral enthesis at the time of surgery for noncontact ACL failure. This tissue damage was similar to that found in donor knees subjected in vitro to repetitive 4 times–body weight impulsive 3-dimensional loading known to cause a fatigue failure of the ACL. Clinical Relevance: These findings suggest that some ACL injuries may be due to an exacerbation of preexisting hierarchical tissue damage from activities known to place larger-than-normal loads on the ACL. Too rapid an increase in these activities could cause ACL tissue damage to accumulate across length scales, thereby affecting ACL structural integrity before it has time to repair. Prevention necessitates an understanding of how ACL loading magnitude and frequency are anabolic, neutral, or catabolic to the ligament.
Metal-free organic phosphorescent materials are promising alternatives to the organometallic counterparts predominantly adopted in organic light-emitting diodes due to their low cost, chemical stability, and large molecular design window. However, only a few reports on OLED devices incorporating metal-free organic phosphors have been presented due to the lack of understanding on material properties, device physics, and device fabrication processes. Here, we report a tailor-designed novel fluorene-based organic phosphor with efficient spin–orbit coupling activated by bromine, aromatic carbonyl, and spiro-annulated phenyl moieties. Photoluminescence quantum yield of 24.0% was achieved when doped in optically inert amorphous polymer hosts. Effects of OLED host materials on the phosphor were investigated in terms of color purity, suppression of exciplex emission, and restraint of molecular motion. Bright green phosphorescence emission (1430 cd/m2 at 100 mA/cm2) was realized with 2.5% maximum external quantum efficiency at 1 mA/cm2.
Conspectus Metal-free purely organic phosphors (POPs) are promising materials for display technologies, solid-state lighting, and sensors platforms because of their advantageous properties such as large design windows, easy processability, and economic material cost. Unlike inorganic semiconductors, creating the conditions for triplet excitons to produce light in organic materials is a demanding task because of the presence of electron spin configurations that undergo spin-forbidden transitions, which is usually facilitated by spin–orbit coupling (SOC). In the absence of heavy metals, however, the SOC efficiency in POPs remains low, and consequently, external nonradiative photophysical processes will also severely affect triplet excitons. Addressing these challenges requires the development of rational molecular design principles to accurately account for how all conceivable structural, electronic, chemical, compositional factors affect materials performance. This Account summarizes important molecular design and matrix engineering strategies to tackle the two key challenges for POPsboosting SOC efficiencies and suppressing nonradiative decays. We start by reviewing the fundamental understanding of internal and external factors affecting the emission efficiencies of POPs, including the theory behind SOC and the origin of nonradiative decays. Subsequently, we discuss the design of contemporary POP systems on the basis of research insights from our group and others, where SOC is mostly promoted by heavy atom effects and the El-Sayed rule. On one hand, nonmetal heavy atoms including Br, I, or Se provide the heavy atom effects to boost SOC. On the other hand, the El-Sayed rule addresses the necessity of orbital angular momentum change in SOC and the general utilization of carbonyl, heterocyclic rings, and other moieties with rich nonbonding electrons. Because of the slow-decaying nature of triplet excitons, engineering the matrices of POPs is critical to effectively suppress collisional quenching as the major nonradiative decay route, thus achieving POPs with decent room temperature quantum efficiency. For that purpose, crystalline or rigid amorphous matrices have been implemented along with specific intermolecular forces between POPs and their environment. Despite the great efforts made in the past decade, the intrinsic SOC efficiencies of POPs remain low, and their emission lifetimes are pinned in the millisecond to second regime. While this is beneficial for POPs with ultralong emission, designing high-SOC POPs with simultaneous fast decay and high quantum efficiencies is particularly advantageous for display systems. Following the design of contemporary POPs, we will discuss molecular design descriptors that could potentially break the current limit to boost internal SOC in purely organic materials. Our recently developed concept of “heavy atom oriented orbital angular momentum manipulation” will be discussed, accompanied by a rich and expanded library of fast and efficient POP molecules, which serves as a stepp...
The key factors determining the emission bandwidth of thermally activated delayed fluorescence (TADF) are investigated by combining computational and experimental approaches. To achieve high internal quantum efficiencies (IQEs) in metal-free organic light emitting diode via TADF, the first triplet (T1) to first singlet (S1) reverse intersystem crossing (rISC) is promoted by configuring molecules in an electron donor-acceptor (D-A) alternation with a large dihedral angle, which results in a small energy gap (EST) between S1 and T1 levels. This allows for effective non-radiative up-conversion of triplet excitons to singlet excitons that fluoresce. However, this traditional molecular design of TADF results in broad emission spectral bands (full-width at half-maximum = 70-100 nm). Despite reports suggesting that suppressing the D-A dihedral rotation narrows the emission band, the origin of emission broadening remains elusive. Indeed, our results suggest that the intrinsic TADF emission bandwidth is primarily determined by the charge transfer character of the molecule, rather than its propensity for rotational motion, which offers a renewed perspective on the rational molecular design of organic emitters exhibiting sharp emission spectra. 15R=H DCzBN1 55 0.41 23 16 R=Me DCzBN2 59 0.40 23 17 R=t-Bu DCzBN3 59 0.41 23 18 R=MeO 79 0.44
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.