Biochar-based carbonaceous adsorbents are gaining interest due to their high availability, ease of modification, and low cost; however, they show limited adsorption of CO2 in flue gas due to common textural properties. In this study, TEPA-modified biochar was used to prepare a solid amine adsorbent for the efficient capture of CO2 in flue gas. First, the porous biochar was prepared with FeCl3, Mg(NO3)2, and H2O (g) as activators and walnut shells as carbon sources. Next, the biochar was modified with TEPA to obtain a solid amine adsorbent. Porous texture properties and sample surface functional groups were characterized, and we measured the adsorption CO2 of the amine-modified biochar in a breakthrough adsorption device. Results showed that biochar has a large specific surface area (744.38 m2 g−1), a total pore volume of 1.41 cm3 g−1, and a high mesoporous volume ratio (82.7%). The high pore volume provided a more efficient support space for loading tetraethylenepentamine (TEPA). The adsorbent had an excellent CO2 adsorption capacity, corresponding to 2.82 mmol g−1, which increased to 3.31 mmol g−1 and kept water resistance at 10% H2O (g) simulated flue gas (SFG). The FTIR analysis showed that H2O (g) inhibited urea production after cyclic adsorption. Therefore, solid amine adsorbent created by amine-modified biochar has potential advantages in its application for capturing CO2 in SFG.
Walnut shell is a very potential biochar precursor because of its wide source, low cost, and easy structure modification. In this paper, the co-activation method of FeCl3, ZnCl2 and H2O(g) was adopted to prepare walnut shell-based biochar with high microporosity and the effect of pore structure on CO2 adsorption performance at different temperatures was investigated. The prepared biochar had a larger specific surface area (2647.8 m2 g−1), satisfactory micropore area (2008.7 m2 g−1) and high total pore volume (2.58 cm3 g−1). At 273 K and 298 K, its CO2 adsorption capacity was 4.79 mmol g−1 and 3.20 mmol g−1, respectively. Particularly, CO2 adsorbed uptake on biochar was strongly sensitive to their narrow micropore volume, instead of the total specific surface area, total pore volume, and micropore specific surface area. The optimal pore size beneficial for CO2 adsorption was 0.33–0.82 nm at 273 K, but the optimal pore size was 0.33–0.39 nm at 298 K. It provides theoretical guidance for future material preparation and selection, and FeCl3, ZnCl2 and H2O(g) may be effective biochar activators.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.