Semiconductor p-n junctions are essential building blocks for electronic and optoelectronic devices. In conventional p-n junctions, regions depleted of free charge carriers form on either side of the junction, generating built-in potentials associated with uncompensated dopant atoms. Carrier transport across the junction occurs by diffusion and drift processes influenced by the spatial extent of this depletion region. With the advent of atomically thin van der Waals materials and their heterostructures, it is now possible to realize a p-n junction at the ultimate thickness limit. Van der Waals junctions composed of p- and n-type semiconductors--each just one unit cell thick--are predicted to exhibit completely different charge transport characteristics than bulk heterojunctions. Here, we report the characterization of the electronic and optoelectronic properties of atomically thin p-n heterojunctions fabricated using van der Waals assembly of transition-metal dichalcogenides. We observe gate-tunable diode-like current rectification and a photovoltaic response across the p-n interface. We find that the tunnelling-assisted interlayer recombination of the majority carriers is responsible for the tunability of the electronic and optoelectronic processes. Sandwiching an atomic p-n junction between graphene layers enhances the collection of the photoexcited carriers. The atomically scaled van der Waals p-n heterostructures presented here constitute the ultimate functional unit for nanoscale electronic and optoelectronic devices.

No abstract

2 Impact ionization, which supports carrier multiplication, is promising for applications in single photon detection 1 and sharp threshold swing field effect devices 2 . However, initiating impact ionization of avalanche breakdown requires a high applied electric field in a long active region, hampering carrier-multiplication with high gain, low bias and superior noise performance 3, 4 . Here we report the observation of ballistic avalanche phenomena in sub-mean free path (MFP) scaled vertical InSe 5 /black phosphorus (BP) 6-9 heterostructures 10 . We use these heterojunctions to fabricate avalanche photodetectors (APD) and impact ionization transistors with sensitive mid-IR light detection (4 μm wavelength) and steep subthreshold swing (SS) (<0.25 mV/dec). The devices show a low avalanche threshold (<1 volt), low noise figure and distinctive density spectral shape. Our transport measurements suggest that the breakdown originates from a ballistic avalanche phenomenon, where the sub-MFP BP channel support the lattice impact-ionization by electrons and holes and the abrupt current amplification without scattering from the obstacles in a deterministic nature. Our results provide new strategies for the development of advanced photodetectors 1, 11, 12 via efficient carrier manipulation at the nanoscale.The upper panel of Fig. 1a shows the schematic of our heterostructure device with electrical connections. It consists of a thin γ-rhombohedral InSe/BP heterostructure connected to bottom and top metal electrodes on substrate. The detailed fabrication processes are presented in the Methods Section. During our measurements, we define the biased electrode connected to BP (~10 nm) as the drain and the grounded electrode connected to InSe (also ~10 nm) as the source. Considering that the lateral resistance of unstacked InSe is much smaller than that of the junction (Supplementary Section 1a), carriers also mainly transport vertically along the nanoscale InSe/BP channel. As a result, n-type InSe and p-type BP 13-15 form a vertical vdW heterojunction. The bottom panel of Fig. 1a 3 schematically shows the lattice structure at the junction interface. Notably, we assembled the InSe/BP junction in a glove box, resulting in a nearly perfect interface. In Fig. 1b, the high-resolution transmission electron microscope image verifies that the atomic stack is clean without the presence of any contamination or amorphous oxide even after all the device fabrication processes.We first characterized the transport properties of our heterostructure devices. With proper gate voltage 16 (10 V here, to ensure a necessary low doping level of BP and InSe, see below for details), the vertical vdW junction presents a standard rectification behaviour as a regular pn diode under moderate bias. In contrast, the reverse-biased current abruptly increases approximately 5 orders above a certain threshold voltage (~-4.8 V here), as shown in Fig. 1c. This "hard-knee" rapid change in current signals a typical avalanche breakdown 16, 17 resulting from impact ...

No abstract

Lin, 18.5% Efficient graphene/GaAs van der Waals heterostructure solar cell, Nano Energy, http://dx.Abstract: High efficient solar cell is highly demanded for sustainable development of human society, leading to the cutting-edge research on various types of solar cells. The physical picture of graphene/semiconductor van der Waals Schottky diode is unique as Fermi level of graphene can be tuned by gate structure relatively independent of semiconductor substrate. However, the reported gated graphene/semiconductor heterostructure has power conversion efficiency (PCE) normally less than 10%. Herein, utilizing a designed graphene-dielectric-graphene gating structure for graphene/GaAs heterojunction, we have achieved solar cell with PCE of 18.5% and open circuit voltage of 0.96 V. Drift-diffusion simulation results agree well with the experimental data and predict this device structure can work with a PCE above 23.8%. This research opens a door of high efficient solar cell utilizing the graphene/semiconductor heterostructure.

Heterojunction solar cells (HSCs) featuring half and full contact of poly (3,4-ethylenedioxythiophene):polystyrene (PE-DOT:PSS) with pyramid-textured silicon (Si) were thoroughly compared via simulations and experiments, and the following conclusions have been reached: (1) The insufficient electrical passivation inherent to the half contact results in enormous decline in short-circuit current density (J sc ) and open-circuit voltage (V oc ). ( 2) For the full-contact HSCs, J sc is mainly dependent on the recombination at the rear interface. With tuning of the contact properties from both sides, calculated (experimental) efficiencies of 14.46%/16.89% (13.94%/16.21%) for the half-/full-contact HSCs were finally obtained. A superior power conversion efficiency (PCE) over 21% is further predicted by considering more optimal contact resistance as well as doping concentration of Si. Our findings clarify why textured-Si/PEDOT:PSS HSCs show V oc and PCE that are inferior to those of planar counterparts in previous reports and further suggest a pathway to fully explore the efficiency potential of Si/PEDOT:PSS hybrid solar cells.

Pepper belongs to the Solanaceae family, which includes many important vegetable crops such as tomato, potato, and eggplant. Not only widely used as vegetables and spicy ingredients, pepper also has diverse applications in pharmaceutics, natural coloring agents, cosmetics, defense repellents, and as ornamental plants (Kim et al., 2014;Qin et al., 2014). Pepper is among the most widely cultivated and consumed vegetables in the world, with annual production reaching to 38 million tons in 2011 (www.fao. org). Pepper fruits have significant diversity in morphology and color, and they provide good models for fruit developmental biology (Paran and van der Knaap, 2007;Rivera et al., 2016). Like all other crops, pepper plants are often confronted with different pathogens and pests (Pernezny et al., 2003), and diverse abiotic stress conditions, which necessitate basic studies on the mechanisms of pepper plants responding to various stimuli to facilitate breeding efforts for tolerant cultivars.

No abstract