No abstract

Two types of Hoganas iron powders-sponge (NC), and highly compressible (SC) were investigated. These specimens were compacted with a pressure of 300, 400, 500, 600, and 700 MPa, before sintering in a production belt-type furnace. Steam treatment of the specimens was at 570°C for 30 min. The sintered density and as-sintered hardness increase with increasing compaction pressure, and are significantly influenced by the powder structural characteristics. During steam treatment the type of powder and compaction pressure have an important influence on the extent of pore closure and weight gain. The maximum hardness was obtained for the components compacted at a pressure of 500 MPa for both groups of iron powders. Surface pore closure and oxidation resistance of the steam-treated components are improved with increasing compaction pressure.

No abstract

No abstract

No abstract