While electrochemical water splitting is one of the most promising methods to store light/electrical energy in chemical bonds, a key challenge remains in the realization of an efficient oxygen evolution reaction catalyst with large surface area, good electrical conductivity, high catalytic properties, and low fabrication cost. Here, a facile solution reduction method is demonstrated for mesoporous Co3O4 nanowires treated with NaBH4. The high‐surface‐area mesopore feature leads to efficient surface reduction in solution at room temperature, which allows for retention of the nanowire morphology and 1D charge transport behavior, while at the same time substantially increasing the oxygen vacancies on the nanowire surface. Compared to pristine Co3O4 nanowires, the reduced Co3O4 nanowires exhibit a much larger current of 13.1 mA cm‐2 at 1.65 V vs reversible hydrogen electrode (RHE) and a much lower onset potential of 1.52 V vs RHE. Electrochemical supercapacitors based on the reduced Co3O4 nanowires also show a much improved capacitance of 978 F g‐1 and reduced charge transfer resistance. Density‐functional theory calculations reveal that the existence of oxygen vacancies leads to the formation of new gap states in which the electrons previously associated with the Co‐O bonds tend to be delocalized, resulting in the much higher electrical conductivity and electrocatalytic activity.

Abstract:The ethanol oxidation reaction (EOR) has drawn increasing interest in electrocatalysis and fuel cells by considering that ethanol as a biomass fuel has advantages of low toxicity, renewability, and a high theoretical energy density compared to methanol. Since EOR is a complex multiple-electron process involving various intermediates and products, the mechanistic investigation as well as the rational design of electrocatalysts are challenging yet essential for the desired complete oxidation to CO2. This mini review is aimed at presenting an overview of the advances in the study of reaction mechanisms and electrocatalytic materials for EOR over the past two decades with a focus on Pt-and Pd-based catalysts. We start with discussion on the mechanistic understanding of EOR on Pt and Pd surfaces using selected publications as examples. Consensuses from the mechanistic studies are that sufficient active surface sites to facilitate the cleavage of the C-C bond and the adsorption of water or its residue are critical for obtaining a higher electro-oxidation activity. We then show how this understanding has been applied to achieve improved performance on various Pt-and Pd-based catalysts through optimizing electronic and bifunctional effects, as well as by tuning their surface composition and structure. Finally we point out the remaining key problems in the development of anode electrocatalysts for EOR. OPEN ACCESSCatalysts 2015, 5 1508

No abstract

Facile interconversion between CO and formate/formic acid (FA) is of broad interest in energy storage and conversion and neutral carbon emission. Historically, electrochemical CO reduction reaction to formate on Pd surfaces was limited to a narrow potential range positive of -0.25 V (vs RHE). Herein, a boron-doped Pd catalyst (Pd-B/C), with a high CO tolerance to facilitate dehydrogenation of FA/formate to CO, is initially explored for electrochemical CO reduction over the potential range of -0.2 V to -1.0 V (vs RHE), with reference to Pd/C. The experimental results demonstrate that the faradaic efficiency for formate (η) reaches ca. 70% over 2 h of electrolysis in CO-saturated 0.1 M KHCO at -0.5 V (vs RHE) on Pd-B/C, that is ca. 12 times as high as that on homemade or commercial Pd/C, leading to a formate concentration of ca. 234 mM mg Pd, or ca. 18 times as high as that on Pd/C, without optimization of the catalyst layer and the electrolyte. Furthermore, the competitive selectivity ηη on Pd-B/C is always significantly higher than that on Pd/C despite a decreases of η and an increases of the CO faradaic efficiency (η) at potentials negative of -0.5 V. The density functional theory (DFT) calculations on energetic aspects of CO reduction reaction on modeled Pd(111) surfaces with and without H-adsorbate reveal that the B-doping in the Pd subsurface favors the formation of the adsorbed HCOO*, an intermediate for the FA pathway, more than that of *COOH, an intermediate for the CO pathway. The present study confers Pd-B/C a unique dual functional catalyst for the HCOOH ↔ CO interconversion.

Formic acid as a natural biomass and a CO2 reduction product has attracted considerable interest in renewable energy exploitation, serving as both a promising candidate for chemical hydrogen storage material and a direct fuel for low temperature liquid fed fuel cells. In addition to its chemical dehydrogenation, formic acid oxidation (FAO) is a model reaction in the study of electrocatalysis of C1 molecules and the anode reaction in direct formic acid fuel cells (DFAFCs). Thanks to a deeper mechanistic understanding of FAO on Pt and Pd surfaces brought about by recent advances in the fundamental investigations, the "synthesis-by-design" concept has become a mainstream idea to attain high-performance Pt- and Pd-based nanocatalysts. As a result, a large number of efficient nanocatalysts have been obtained through different synthesis strategies by tailoring geometric and electronic structures of the two primary catalytic metals. In this paper, we provide a brief overview of recent progress in the mechanistic studies of FAO, the synthesis of novel Pd- and Pt-based nanocatalysts as well as their practical applications in DFAFCs with a focus on discussing studies significantly contributing to these areas in the past five years.

No abstract

The decomposition of HCOOH on Pd surfaces over a potential range of practical relevance to hydrogen production and fuel cell anode operation was probed by combining high-sensitivity in situ surface-enhanced IR spectroscopy with attenuated total reflection and thin-layer flow cell configurations. For the first time, concrete spectral evidence of CO(ad) formation has been obtained, and a new main pathway from HCOOH to CO(ad) involving the reduction of the dehydrogenation product of HCOOH (i.e., CO(2)) is proposed.

The hydrogen evolution reaction (HER) on Pt and other noble metals often undergo ~2 orders of magnitude decrease in reaction kinetics when changing the electrolyte pH from acid to alkaline regime. The origin of this kinetic pH effect remains far from a consensus, hindering the rational design of pHspeci c electrocatalysts. Herein, by meticulously comparing the electric double layer (EDL) structures of acid and alkaline interfaces from the ab initio molecular dynamics (AIMD) simulations, and the computational vibration spectra of water molecules in the AIMD-simulated interfaces with the results of in situ surface-enhanced infrared absorption spectroscopy (SEIRAS), we conclude that neither the hydrogen adsorption strength nor the water dissociation barrier is responsible for the greatly reduced HER kinetics on Pt in alkaline media, because the alkaline interface could have more favorite hydrogen adsorption strength and lower barriers for individual Volmer reactions; it is the signi cantly different connectivity of hydrogen bond networks in EDL that cause the huge kinetic pH effect of HER. What's further, using Pt-Ru alloy as model, our results reveal an unprecedented role of OH adsorption in improving the kinetics of alkaline hydrogen electrocatalysis on Pt-based catalysts, namely, by increasing the connectivity of hydrogen bond networks in EDL rather than by directly affecting the energetics of surface steps. These ndings should add signi cant new insights into the key roles of EDL structures in electrocatalysis. Meanwhile, this study offers a referential research paradigm for exploring the atomic structures of electrochemical interfaces by combining AIMD simulations, computational spectroscopy, and experimental spectroscopy.