No abstract

No abstract

No abstract

CO is a toxic gas discharged as a byproduct in tail gases from different industrial flue gases, which needs to be taken care of urgently. In this study, a CuCl/AC adsorbent was made by a facile route of physically mixing CuCl2 and Cu(HCOO)2 powder with activated carbon (AC), followed by heating at 533 K under vacuum. The samples were characterized by X-ray powder diffraction (XRD), inductively coupled plasma optical emission spectrometry (ICP-OES), N2 adsorption/desorption, and scanning electron microscopy (SEM). It was shown that Cu(II) can be completely reduced to Cu(I), and the monolayer dispersion threshold of CuCl on AC support is 4 mmol·g−1 AC. The adsorption isotherms of CO, CO2, CH4, and N2 on CuCl/AC adsorbents were measured by the volumetric method, and the CO/CO2, CO/CH4, and CO/N2 selectivities of the adsorbents were predicted using ideal adsorbed solution theory (IAST). The obtained adsorbent displayed a high CO adsorption capacity, high CO/N2, CO/CH4, and CO/CO2 selectivities, excellent ad/desorption cycle performance, rapid adsorption rate, and appropriate isosteric heat of adsorption, which made it a promising adsorbent for CO separation and purification.

Zeolite X/activated carbon composite material (X/AC) was prepared from elutrilithe, by a process consisting of carbonization, activation, and subsequent hydrothermal transformation of aluminosilicate in alkaline solution, which was used for the removal of ammoniacal nitrogen from aqueous solutions. Adsorption kinetics, equilibrium, and thermodynamic were studied and fitted by various models. The adsorption kinetics is best depicted by pseudosecond-order model, and the adsorption isotherm fits the Freundlich and Redlich-Peterson model. This explains the ammoniacal nitrogen adsorption onto X/AC which was chemical adsorption in nature. Thermodynamic properties such as ΔG, ΔH, and ΔS were determined for the ammoniacal nitrogen adsorption, and the positive enthalpy confirmed that the adsorption process was endothermic. It can be inferred that ammoniacal nitrogen removal by X/AC composite is attributed to the ion exchange ability of zeolite X. Further, as a novel sorbent, this material has the potential application in removing ammoniacal nitrogen coexisting with other organic compounds from industrial wastewater.

No abstract

Controlling the microstructure and discharge performance of Mg-based alloys is of great importance and aimed at optimizing magnesium anode materials to the level required for power source applications. In this study, the microstructure along with discharge properties of extruded Mg-Sn-Zn-Ag alloys with Sn content ranging from 2 wt.% to 8 wt.% are investigated. The results indicate that the Mg-4Sn-1Zn-1Ag alloy exhibits the most negative discharge potential during the half-cell test than the other alloys investigated in this study. Moreover, a Mg-air battery with a Mg-4Sn-1Zn-1Ag alloy as the anode provides a relatively high cell voltage together with power density compared with the counterpart battery. Furthermore, the microscopic mechanism of an anode material exhibiting an excellent discharge performance is systematically discussed in terms of the second phase, dynamic recrystallization, crystal orientation and discharge product film.

No abstract