Carbon fiber (CF) nonwoven fabric possesses excellent chemical resistance, remarkable electrical properties, and low density, but its mechanical strength must be enhanced to facilitate its application. Therefore, a flexible compound nonwoven fabric (CEF-NF) consisting of CF and a bicomponent polypropylene/polyethylene core/sheath fiber (known as ESF) was prepared using a 2-step wet papermaking/ thermal bonding process. Scanning electron microscopy observations indicated that the CEF-NF fibrous network could be strengthened without blocking its pores by using a heat-pressing temperature falling between the melting regions of the sheath polyethylene and core polypropylene. Additionally, uniaxial tensile experiments were conducted to investigate the failure mode and tensile properties of the CEF-NF by varying the thermal bonding and structural parameters. The results showed that 3 failure modes of fiber physical contact separation, thermal bond breakage, and ESF fracture emerged and could be defined based on the variation in the heat-pressing temperature. The tensile strength of the CEF-NF was improved with increasing thermal bonding and structural parameters. Under a set of process parameters, ie, 180°C heat-pressing temperature, 6-MPa heat-pressing pressure, 40 wt% ESF mass fraction, and 40-gsm areal density, the tensile strength of CEF-NF reached 5.7 MPa, which is much higher than that of pure CF nonwoven fabric.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.