As cross-cultural management in multinational companies is a complex topic, it's important to explore the deep reasons behind; Documentary research in this thesis is mainly about the literature review concerning different cultural patterns.
To study the influence of welding current on the welding quality of 5052 aluminum alloy TIG welding, the microstructure, mechanical properties and corrosion resistance of the welded joints obtained under different currents from 100 A to 120 A were discussed. The results showed that when the welding current is 100~120 A, with the increases of welding current, the strength of the welded joint (of 5052 aluminum alloy TIG) increases, while the plasticity decreases.
The K-TIG welding method was used to conduct welding experiments on 6001 aluminum alloy, and the microstructure and mechanical properties of the welded joints were studied by optical microscope, scanning electron microscope, universal testing machine, microhardness tester, etc. The results show that the center of the weld is equiaxed crystals and a small amount of dendrites, the near seam zone is columnar crystals formed by associated crystals, the fusion zone is equiaxed crystals of varying sizes, and there are grain boundary liquefaction and β″ phase in this zone. Agglomeration, growth and transformation, there are grain growth and precipitation zones in the heat-affected zone; the tensile fracture positions are all at the fusion line, and the fractures are ductile and brittle mixed quasi-cleavage fractures, with dimples, river patterns, and cleavage steps; welded joints The hardness of the fusion zone has a W-shaped distribution, and the hardness value of the fusion zone is lower due to over-aging softening.
The K-TIG welding method was used to conduct welding experiments on 6001 aluminum alloy, and the microstructure and mechanical properties of the welded joints were studied by optical microscope, scanning electron microscope, universal testing machine, microhardness tester, etc. The results show that the center of the weld is equiaxed crystals and a small amount of dendrites, the near seam zone is columnar crystals formed by associated crystals, the fusion zone is equiaxed crystals of varying sizes, and there are grain boundary liquefaction and β″ phase in this zone. Agglomeration, growth and transformation, there are grain growth and precipitation zones in the heat-affected zone; the tensile fracture positions are all at the fusion line, and the fractures are ductile and brittle mixed quasi-cleavage fractures, with dimples, river patterns, and cleavage steps; welded joints The hardness of the fusion zone has a W-shaped distribution, and the hardness value of the fusion zone is lower due to over-aging softening.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.