No abstract

No abstract

No abstract

No abstract

No abstract

Purpose This paper aims to address the numerical simulation of additive manufacturing (AM) processes. The numerical results are compared with the experimental campaign carried out at State Key Laboratory of Solidification Processing laboratories, where a laser solid forming machine, also referred to as laser engineered net shaping, is used to fabricate metal parts directly from computer-aided design models. Ti-6Al-4V metal powder is injected into the molten pool created by a focused, high-energy laser beam and a layer of added material is sinterized according to the laser scanning pattern specified by the user. Design/methodology/approach The numerical model adopts an apropos finite element (FE) activation technology, which reproduces the same scanning pattern set for the numerical control system of the AM machine. This consists of a complex sequence of polylines, used to define the contour of the component, and hatches patterns to fill the inner section. The full sequence is given through the common layer interface format, a standard format for different manufacturing processes such as rapid prototyping, shape metal deposition or machining processes, among others. The result is a layer-by-layer metal deposition which can be used to build-up complex structures for components such as turbine blades, aircraft stiffeners, cooling systems or medical implants, among others. Findings Ad hoc FE framework for the numerical simulation of the AM process by metal deposition is introduced. Description of the calibration procedure adopted is presented. Originality/value The objectives of this paper are twofold: firstly, this work is intended to calibrate the software for the numerical simulation of the AM process, to achieve high accuracy. Secondly, the sensitivity of the numerical model to the process parameters and modeling data is analyzed.

A three-dimensional (3D) thermomechanical coupled model for Ti-6Al-4V alloy has been calibrated through experiments of 40-layers metal deposition using different scanning strategies. The sensitivity analysis of the mechanical parameters shows that the thermal expansion coefficient as well as the elastic limit of Ti-6Al-4V have a great impact on the mechanical behavior. Using the validated model and optimal mechanical parameters, the evolution of thermo-mechanical fields in LSF has been analyzed. It has been found that the stresses and distortions are developed in two stages, after the deposition of the first layer and during the cooling phase after the manufacturing of the component. The cooling phase is the responsible of 70% of the residual stresses and 60% of the total distortions, respectively. These analyses indicate that by controlling the initial substrate temperature (pre-heating phase) and the final cooling phase it is possible to mitigate both distortion and residual stresses. Hence, the influence of different pre-heating procedures on the mechanical fields has been analyzed. The results show that increasing the pre-heating temperature of substrate is the most effective way to reduce the distortions and residual stresses in Additive Manufacturing.

No abstract