A graphene-based long-period fiber grating (LPFG) surface plasmon resonance (SPR) sensor is proposed. A monolayer of graphene is coated onto the Ag film surface of the LPFG SPR sensor, which increases the intensity of the evanescent field on the surface of the fiber and thereby enhances the interaction between the SPR wave and molecules. Such features significantly improve the sensitivity of the sensor. The experimental results demonstrate that the sensitivity of the graphene-based LPFG SPR sensor can reach 0.344 nm%−1 for methane, which is improved 2.96 and 1.31 times with respect to the traditional LPFG sensor and Ag-coated LPFG SPR sensor, respectively. Meanwhile, the graphene-based LPFG SPR sensor exhibits excellent response characteristics and repeatability. Such a SPR sensing scheme offers a promising platform to achieve high sensitivity for gas-sensing applications.

Graphene nanowalls (GNWs) with different sizes (i.e., length and height) were grown directly on the surface of individual carbon fibers (CFs) using a radio frequency plasma-enhanced chemical vapor deposition (RF-PECVD) technique. The size was controlled by varying the deposition time. The GNW-modified CFs were embedded into epoxy resin matrix to prepare a series of carbon-fiber-reinforced composites (CFRCs). The results indicated that GNWs were remarkably effective in improving the interfacial shear strength (IFSS) and interlaminar shear strength (ILSS) of the carbon-fiber-reinforced composites. The enhancement effect on the strength strongly depended on the size of GNWs. It increased with the increase in the GNWs’ size and reached the maximum upon the incorporation of GNWs that were grown for 45 min. Noticeable increases of 222.8% and 41.1% were observed in IFSS and ILSS, respectively. The enhancement mechanism was revealed by means of scanning electron microscope (SEM) fractography analysis. However, further increase of GNW size led to no more improvement in the shear strength. It could result from the increased defect concentration and wrinkle size in the GNWs, which deteriorated the strength.

We proposed a narrowband perfect absorber that was based on dielectric-metal metasurface for wide-band surface-enhanced infrared sensing. It is found that the narrowband perfect absorber can generate the hybrid guided modes with high quality-factor at infrared frequencies, which make the absorber highly sensitive to the surrounded analyte. Moreover, tuning the incident angle can actively modulate the resonant wavelength of absorber. Such an absorber with excellent features is employed to realize both refractive index sensing and infrared vibrational fingerprint sensing on a single substrate. It is demonstrated that a refractive index sensitivity of 1800 nm/RIU and figure of merit of 62 RIU−1 can be obtained as the refractive index sensor. While, as a surface enhanced infrared absorption spectroscopy substrate, two closed vibrational modes of analyte with nanometer thick layers can be effectively identified and selectively detected with 50-folds enhancement by actively tuning the incident angle without any change in the structural parameters (periodicity, width, height, and refractive index of the grating) of the device after fabricating. Our study offers a promising approach for designing high-performance surface-enhanced infrared optical sensors in the infrared region.