Understanding of charge transfer processes is determinant to the performance optimization for semiconductor photocatalysts. As a representative model of composite photocatalysts, metal-particle-decorated ZnO has been widely employed for a great deal of photocatalytic applications; however, the dependence of charge carrier dynamics on the metal content and metal composition and their correlation with the photocatalytic properties have seldom been reported. Here, the interfacial charge dynamics for metal-decorated ZnO nanocrystals were investigated and their correspondence with the photocatalytic properties was evaluated. The samples were prepared with a delicate antisolvent approach, in which ZnO nanocrystals were grown along with metal particle decoration in a deep eutectic solvent. By modulating the experimental conditions, the metal content (from 0.6 to 2.3 at%) and metal composition (including Ag, Au, and Pd) in the resulting metal-decorated ZnO could be readily controlled. Time-resolved photoluminescence spectra showed that an optimal Au content of 1.3 at% could effectuate the largest electron transfer rate constant for Au-decorated ZnO nanocrystals, in conformity with the highest photocatalytic efficiency observed. The relevance of charge carrier dynamics to the metal composition was also inspected and realized in terms of the energy level difference between ZnO and metal. Among the three metal-decorated ZnO samples tested, ZnO-Pd displayed the highest photocatalytic activity, fundamentally according with the largest electron transfer rate constant deduced in carrier dynamics measurements. The current work was the first study to present the correlations among charge carrier dynamics, metal content, metal composition, and the resultant photocatalytic properties for semiconductor/metal heterostructures. The findings not only helped to resolve the standing issues regarding the mechanistic foundation of photocatalysis but also shed light on the intelligent design of semiconductor/metal composite systems to consolidate their utility in photocatalytic fields.

An environmentally benign antisolvent method has been developed to prepare Cu(2+)-doped ZnO nanocrystals with controllable dopant concentrations. A room temperature ionic liquid, known as a deep eutectic solvent (DES), was used as the solvent to dissolve ZnO powders. Upon the introduction of the ZnO-containing DES into a bad solvent which shows no solvation to ZnO, ZnO was precipitated and grown due to the dramatic decrease of solubility. By adding Cu(2+) ions to the bad solvent, the growth of ZnO from the antisolvent process was accompanied by Cu(2+) introduction, resulting in the formation of Cu(2+)-doped ZnO nanocrystals. The as-prepared Cu(2+)-doped ZnO showed an additional absorption band in the visible range (400-800 nm), which conduced to an improvement in the overall photon harvesting efficiency. Time-resolved photoluminescence spectra, together with the photovoltage information, suggested that the doped Cu(2+) may otherwise trap photoexcited electrons during the charge transfer process, inevitably depressing the photoconversion efficiency. The photoactivity of Cu(2+)-doped ZnO nanocrystals for photoelectrochemical water oxidation was effectively enhanced in the visible region, which achieved the highest at 2.0 at% of Cu(2+). A further increase in the Cu(2+) concentration however led to a decrease in the photocatalytic performance, which was ascribed to the significant carrier trapping caused by the increased states given by excessive Cu(2+). The photocurrent action spectra illustrated that the enhanced photoactivity of the Cu(2+)-doped ZnO nanocrystals was mainly due to the improved visible photon harvesting achieved by Cu(2+) doping. These results may facilitate the use of transition metal ion-doped ZnO in other photoconversion applications, such as ZnO based dye-sensitized solar cells and magnetism-assisted photocatalytic systems.

Conjugated polymer/nanocrystal composites have attracted much attention for use in renewable energy applications because of their versatile and synergistic optical and electronic properties. Upon absorbing photons, charge separation occurs in the nanocrystals, generating electrons and holes for photocurrent flow or reduction/oxidation (redox) reactions under proper conditions. Incorporating these nanocrystals into conjugated polymers can complement the visible light absorption range of the polymers for photovoltaics applications or allow the polymers to sensitize or immobilize the nanocrystals for photocatalysis. Here, the current developments of conjugated polymer/nanocrystal nanocomposites for bulk heterojunction-type photovoltaics incorporating Cd- and Pb-based nanocrystals or quantum dots are reviewed. The effects of manipulating the organic ligands and the concentration of the nanocrystal precursor, critical factors that affect the shape and aggregation of the nanocrystals, are also discussed. In the conclusion, the mechanisms through which conjugated polymers can sensitize semiconductor nanocrystals (TiO2 , ZnO) to ensure efficient charge separation, as well as how they can support immobilized nanocrystals for use in photocatalysis, are addressed.

In the mouse, the SH3P12 or the c-Cbl-associated protein (CAP) has been shown as an important signaling molecule in insulin-stimulated glucose uptake. The human homolog for the sorbin and SH3-domain-containing-1 gene, termed SORBS1, might play a role in human disorders with insulin resistance. To explore the genetic role of SORBS1 in human obesity and type 2 diabetes, we investigated the nucleotide polymorphisms in the SORBS1 gene with molecular scanning. After scanning for a total of 13,136 bp in each of 40 chromosomes, we have identified 14 single nucleotide polymorphisms (SNPs) in the human SORBS1 gene. Among them, two SNPs affected amino acid coding (R74W and T228A), four occurred within exons but did not affect amino acid coding, and the remaining eight occurred within introns, which were located outside of the consensus region of the splicing mechanism. Further studies in 202 non-obese, 113 obese and 455 subjects with type 2 diabetes revealed that the A-allele of the T228A polymorphism in exon 7 exerted a protective role for both obesity [relative risk 0.466; 95% confidence interval (95% CI) 0.265-0.821] and diabetes (relative risk 0.668; 95% CI 0.472-0.945). Neither allele of the R74W polymorphism was associated with either obesity or diabetes. In conclusion, our results suggest that the A228 allele of the T228A polymorphism of the SORBS1 gene is a protective factor for both obesity and diabetes, and also imply that the SORBS1 gene plays an important role in the pathogenesis of human disorders with insulin resistance.

Control of self-assembly is significant to the preparation of supramolecular materials and illustration of diversities in either natural or artificial systems. Supra-amphiphiles have remarkable advantages in the construction of nanostructures but control of shape and size of supramolecular nanostructures is still a great challenge. Here, we fabricate a series of supra-amphiphiles by utilizing the recognition motifs based on a heteroditopic porphyrin amphiphile and its zinc complex. These porphyrin amphiphiles can bind with a few guests including Cl – , coronene, C 60 , 4,4′-bipyridine and 2,4,6-tri(pyridin-4-yl)-1,3,5-triazine, which are further applied to facilitate the controllable self-assembly. Addition of these guests result in the formation of various supra-amphiphiles with well-defined structures, thus induce the generation of different aggregates. A diverse of aggregation morphologies including nanospheres, nanorods, films, spheric micelles, vesicles and macrowires are constructed upon the influence of specific complexation, which highlights the present work with abundant control on the shapes and dimensions of self-assemblies.

This work describes an oxidation process of iron-iron oxide core-shell nanowires at temperatures between 100 °C and 800 °C. The studied nanomaterial was synthesized through a simple chemical reduction of iron trichloride in an external magnetic field under a constant flow of argon. The electron microscopy investigations allowed determining that the as-prepared nanowires were composed of self-assembled iron nanoparticles which were covered by a 3 nm thick oxide shell and separated from each other by a thin interface layer. Both these layers exhibited an amorphous or highly-disordered character which was traced by means of transmission electron microscopy and Mössbauer spectroscopy. The thermal oxidation was carried out under a constant flow of argon which contained the traces of oxygen. The first stage of process was related to slow transformations of amorphous Fe and amorphous iron oxides into crystalline phases and disappearance of interfaces between iron nanoparticles forming the studied nanomaterial (range: 25-300 °C). After that, the crystalline iron core and iron oxide shell became oxidized and signals for different compositions of iron oxide sheath were observed (range: 300-800 °C) using X-ray diffraction, Raman spectroscopy and Mössbauer spectroscopy. According to the thermal gravimetric analysis, the nanowires heated up to 800 °C under argon atmosphere gained 37% of mass with respect to their initial weight. The structure of the studied nanomaterial oxidized at 800 °C was mainly composed of α-Fe2O3 (∼ 93%). Moreover, iron nanowires treated above 600 °C lost their wire-like shape due to their shrinkage and collapse caused by the void coalescence.

This research discusses the influence of morphology of nanomagnetic materials (one-dimensional iron nanowires and zero-dimensional iron nanoparticles) on heating efficiency of the hyperthermia treatment. One-dimensional iron nanowires, synthesized by reducing method in external magnetic field, are explored in terms of their material properties, magnetic anisotropy, and cytotoxicity of EMT-6 cells. The magnetic anisotropy of an array of nanowires is examined in parallel and perpendicular magnetic fields by VSM. For the magnetic hyperthermia treatment tests, iron nanowires and nanoparticles with different concentrations are heated in alternating magnetic field to measure their actual heating efficiency and SLP heating properties. The shape effects of iron nanomaterials can be revealed from their heating properties. The cytotoxicity of nanowires with different concentrations is measured by its survival rate in EMT-6 with the cells cultivated for 6 and 24 hours.

SummaryThe main goal of this work is to study the structural and magnetic properties of iron nanowires and iron nanoparticles, which have been fabricated in almost the same processes. The only difference in the synthesis is an application of an external magnetic field in order to form the iron nanowires. Both nanomaterials have been examined by means of transmission electron microscopy, energy dispersive X-ray spectrometry, X-ray diffractometry and Mössbauer spectrometry to determine their structures. Structural investigations confirm that obtained iron nanowires as well as nanoparticles reveal core–shell structures and they are composed of crystalline iron cores that are covered by amorphous or highly defected phases of iron and iron oxides. Magnetic properties have been measured using a vibrating sample magnetometer. The obtained values of coercivity, remanent magnetization, saturation magnetization as well as Curie temperature differ for both studied nanostructures. Higher values of magnetizations are observed for iron nanowires. At the same time, coercivity and Curie temperature are higher for iron nanoparticles.