Using a simple hydrothermal procedure, cobalt oxide (Co(3)O(4)) nanowires were in situ synthesized on three-dimensional (3D) graphene foam grown by chemical vapor deposition. The structure and morphology of the resulting 3D graphene/Co(3)O(4) composites were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and Raman spectroscopy. The 3D graphene/Co(3)O(4) composite was used as the monolithic free-standing electrode for supercapacitor application and for enzymeless electrochemical detection of glucose. We demonstrate that it is capable of delivering high specific capacitance of ∼1100 F g(-1) at a current density of 10 A g(-1) with excellent cycling stability, and it can detect glucose with a ultrahigh sensitivity of 3.39 mA mM(-1) cm(-2) and a remarkable lower detection limit of <25 nM (S/N = 8.5).

Recent advances in flexible and stretchable electronics (FSE), a technology diverging from the conventional rigid silicon technology, have stimulated fundamental scientific and technological research efforts. FSE aims at enabling disruptive applications such as flexible displays, wearable sensors, printed RFID tags on packaging, electronics on skin/organs, and Internet-of-things as well as possibly reducing the cost of electronic device fabrication. Thus, the key materials components of electronics, the semiconductor, the dielectric, and the conductor as well as the passive (substrate, planarization, passivation, and encapsulation layers) must exhibit electrical performance and mechanical properties compatible with FSE components and products. In this review, we summarize and analyze recent advances in materials concepts as well as in thin-film fabrication techniques for high- k (or high-capacitance) gate dielectrics when integrated with FSE-compatible semiconductors such as organics, metal oxides, quantum dot arrays, carbon nanotubes, graphene, and other 2D semiconductors. Since thin-film transistors (TFTs) are the key enablers of FSE devices, we discuss TFT structures and operation mechanisms after a discussion on the needs and general requirements of gate dielectrics. Also, the advantages of high- k dielectrics over low- k ones in TFT applications were elaborated. Next, after presenting the design and properties of high- k polymers and inorganic, electrolyte, and hybrid dielectric families, we focus on the most important fabrication methodologies for their deposition as TFT gate dielectric thin films. Furthermore, we provide a detailed summary of recent progress in performance of FSE TFTs based on these high- k dielectrics, focusing primarily on emerging semiconductor types. Finally, we conclude with an outlook and challenges section.

No abstract

Organic afterglow materials, developed recently by breaking through the difficulties in modulating ultrafast-decayed excited states, exhibit ultralong-lived emission for persistent luminescence with lifetimes of several orders of magnitude longer than traditional fluorescent and phosphorescent emissions at room temperature. Their exceptional properties, namely ultralong luminescent lifetime, large Stokes shifts, facile excited state transformation, and environmentally sensitive emission, have led to a diverse range of advanced optoelectronic applications. Here, the organic afterglow is reviewed from the perspective of fundamental concepts on both phenomenon and mechanism, examining the technical challenges in relation to excited state tuning and lifetime elongation. In particular, the advances in material design strategies that afford a large variety of organic afterglow materials for a broad utility in optoelectronics including lighting and displays, anti-counterfeiting, optical recording, chemical sensors and bio-imaging are highlighted.

It remains challenging to fabricate strain-sensing materials and exquisite geometric constructions for integrating extraordinary sensitivity, low strain detectability, high stretchability, tunable sensing range, and thin device dimensions into a single type of strain sensor. A percolation network based on TiCT MXene/carbon nanotube (CNT) composites was rationally designed and fabricated into versatile strain sensors. This weaving architecture with excellent electric properties combined the sensitive two-dimensional (2D) TiCT MXene nanostacks with conductive and stretchable one-dimensional (1D) CNT crossing. The resulting strain sensor can be used to detect both tiny and large deformations with an ultralow detection limit of 0.1% strain, high stretchability (up to 130%), high sensitivity (gauge factor up to 772.6), tunable sensing range (30% to 130% strain), thin device dimensions (<2 μm), and excellent reliability and stability (>5000 cycles). The versatile and scalable TiCT MXene/CNT strain sensors provide a promising route to future wearable artificial intelligence with comprehensive tracking ability of real-time and in situ physiological signals for health and sporting applications.

Recently, self-healing hydrogel bioelectronic devices have raised enormous interest for their tissue-like mechanical compliance, desirable biocompatibility, and tunable adhesiveness on bioartificial organs. However, the practical applications of these hydrogel-based sensors are generally limited by their poor fulfillment of stretchability and sensitivity, brittleness under subzero temperature, and single sensory function. Inspired by the fiber-reinforced microstructures and mechano-transduction systems of human muscles, a self-healing (90.8%), long-lasting thermal tolerant and dual-sensory hydrogel-based sensor is proposed, with high gauge factor (18.28) within broad strain range (268.9%), low limit of detection (5% strain), satisfactory thermosensation (−0.016 °C–1), and highly discernible temperature resolution (2.7 °C). Especially by introducing a glycerol/water binary solvent system, desirable subzero-temperature self-healing performance, high water-retaining, and durable adhesion feature can be achieved, resulting from the ice crystallization inhibition and highly dynamic bonding. On account of the advantageous mechanoreception and thermosensitive capacities, a flexible touch keyboard for signature identification and a “fever indicator” for human forehead’s temperature detection can be realized by this hydrogel bioelectronic device.

Efficiency roll-off is a major issue for most types of light-emitting diodes (LEDs), and its origins remain controversial. Here we present investigations of the efficiency roll-off in perovskite LEDs based on two-dimensional layered perovskites. By simultaneously measuring electroluminescence and photoluminescence on a working device, supported by transient photoluminescence decay measurements, we conclude that the efficiency roll-off in perovskite LEDs is mainly due to luminescence quenching which is likely caused by non-radiative Auger recombination. This detrimental effect can be suppressed by increasing the width of quantum wells, which can be easily realized in the layered perovskites by tuning the ratio of large and small organic cations in the precursor solution. This approach leads to the realization of a perovskite LED with a record external quantum efficiency of 12.7%, and the efficiency remains to be high, at approximately 10%, under a high current density of 500 mA cm −2 .

Two-dimensional (2D) metal-organic framework (MOF) nanosheets have been recently regarded as the model electrocatalysts due to their porous structure, fast mass and ion transfer through the thickness, and large portion of exposed active metal centers. Combining them with electrically conductive 2D nanosheets is anticipated to achieve further improved performance in electrocatalysis. In this work, we in situ hybridized 2D cobalt 1,4-benzenedicarboxylate (CoBDC) with TiCT (the MXene phase) nanosheets via an interdiffusion reaction-assisted process. The resulting hybrid material was applied in the oxygen evolution reaction and achieved a current density of 10 mA cm at a potential of 1.64 V vs reversible hydrogen electrode and a Tafel slope of 48.2 mV dec in 0.1 M KOH. These results outperform those obtained by the standard IrO-based catalyst and are comparable with or even better than those achieved by the previously reported state-of-the-art transition-metal-based catalysts. While the CoBDC layer provided the highly porous structure and large active surface area, the electrically conductive and hydrophilic TiCT nanosheets enabled the rapid charge and ion transfer across the well-defined TiCT-CoBDC interface and facilitated the access of aqueous electrolyte to the catalytically active CoBDC surfaces. The hybrid nanosheets were further fabricated into an air cathode for a rechargeable zinc-air battery, which was successfully used to power a light-emitting diode. We believe that the in situ hybridization of MXenes and 2D MOFs with interface control will provide more opportunities for their use in energy-based applications.