Li anodes have been rapidly developed in recent years owing to the rising demand for higher-energy-density batteries. However, the safety issues induced by dendrites hinder the practical applications of Li anodes. Here, Li metal anodes stabilized by regulating lithium plating/stripping in vertically aligned microchannels are reported. The current density distribution and morphology evolution of the Li deposits on porous Cu current collectors are systematically analyzed. Based on simulations in COMSOL Multiphysics, the tip effect leads to preferential deposition on the microchannel walls, thus taking full advantage of the lightening rod theory of classical electromagnetism for restraining growth of Li dendrites. The Li anode with a porous Cu current collector achieves an enhanced cycle stability and a higher average Coulombic efficiency of 98.5% within 200 cycles. In addition, the resultant LiFePO /Li full battery demonstrates excellent rate capability and stable cycling performance, thus demonstrating promise as a current collector for high-energy-density, safe rechargeable Li batteries.

Metallic lithium affords the highest theoretical capacity and lowest electrochemical potential and is viewed as a leading contender as an anode for high-energy-density rechargeable batteries. However, the poor wettability of molten lithium does not allow it to spread across the surface of lithiophobic substrates, hindering the production and application of this anode. Here we report a general chemical strategy to overcome this dilemma by reacting molten lithium with functional organic coatings or elemental additives. The Gibbs formation energy and newly formed chemical bonds are found to be the governing factor for the wetting behavior. As a result of the improved wettability, a series of ultrathin lithium of 10–20 μm thick is obtained together with impressive electrochemical performance in lithium metal batteries. These findings provide an overall guide for tuning the wettability of molten lithium and offer an affordable strategy for the large-scale production of ultrathin lithium, and could be further extended to other alkali metals, such as sodium and potassium.

Activated carbon (AC) was modified by FeCl3. Batch experiments were carried out to evaluate the characteristics of equilibrium, kinetics and thermodynamics of Sulfamethazine adsorption onto original and modified AC. The results showed that Fe3+ treatment changed the surface area, pore volume and surface zeta potential and increased the number of surface oxygenic functional groups. The adsorption of Sulfamethazine on modified activated carbon (MAC) was significantly improved. Isotherm test results revealed that the adsorption isotherms of Sulfamethazine on MAC fit the Freundlich, Langmuir and Temkin equations well. The maximum adsorption quantity of Sulfamethazine on MAC was 17.2414 mg/g at 25 °C. The adsorption kinetics of Sulfamethazine on AC and MAC can be characterized by the pseudo-second-order model. The adsorption process was affected by membrane diffusion, surface adsorption and internal diffusion. The adsorption quantities of Sulfamethazine first increased and then decreased for pH between 3 and 10. The removal efficiencies decreased with increasing temperature, which is favorable for adsorption at low temperature. It was also found that the mechanisms of adsorption included micropore capture and electrostatic, hydrogen bonding, π-π electron donor-acceptor (EDA) and coordination interactions as well as other interactions.