The family of solution-processed tin-based perovskites is demonstrated as a new and superior near-infrared gain medium. Due to the large electron-hole bimolecular recombination associated with tin and the reduced trap density with SnF treatment, these lead-free "green" perovskites yield stable coherent light emission extending to ≈1 μm at strikingly low thresholds.

Perovskite semiconductors are actively investigated for high performance solar cells. Their large optical absorption coefficient and facile solution-based, low-temperature synthesis of thin films make perovskites also a candidate for light-emitting devices across the visible and near-infrared. Specific to their potential as optical gain medium for lasers, early work has demonstrated amplified spontaneous emission and lasing at attractively low thresholds of photoexcitation. Here, we take an important step toward practically usable perovskite lasers where a solution-processed thin film is embedded within a two-dimensional photonic crystal resonator. We demonstrate high degree of temporally and spatially coherent lasing whereby well-defined directional emission is achieved near 788 nm wavelength at optical pumping energy density threshold of 68.5 ± 3.0 μJ/cm(2). The measured power conversion efficiency and differential quantum efficiency of the perovskite photonic crystal laser are 13.8 ± 0.8% and 35.8 ± 5.4%, respectively. Importantly, our approach enables scalability of the thin film lasers to a two-dimensional multielement pixelated array of microlasers which we demonstrate as a proof-of-concept for possible projection display applications.

Hybrid two-dimensional (2D) lead halide perovskites have been employed in optoelectronic applications, including white light emission for light emitting diodes (LEDs). However, until now, there have been limited reports on white light emitting lead halide perovskites with experimental insights into the mechanism of the broad band emission. Here, we present white light emission from a 2D hybrid lead chloride perovskite, using the widely known phenethylammonium cation. The single crystal X-ray structural data, time-resolved photophysical measurements, and DFT calculations are consistent with broad band emission arising from strong exciton-phonon coupling with the organic lattice, which is independent of surface defects. The phenethylammonium lead chloride material exhibits a remarkably high color rendering index of 84, CIE coordinate of (0.37,0.42), CCT of 4426, and photostability, making it ideal for natural white LEDs applications.

A new spin on perovskites untwined: Ultrafast optical switching and tuning of spin-energy states in layered halide perovskites.

Lead halide perovskite solar cells are presently the forerunner among the third generation solution-processed photovoltaic technologies. With efficiencies exceeding 20% and low production costs, they are prime candidates for commercialization. Critical insights into their light harvesting, charge transport, and loss mechanisms have been gained through time-resolved optical probes such as femtosecond transient absorption spectroscopy (fs-TAS), transient photoluminescence spectroscopy, and time-resolved terahertz spectroscopy. Specifically, the discoveries of long balanced electron-hole diffusion lengths and gain properties in halide perovskites underpin their significant roles in uncovering structure-function relations and providing essential feedback for materials development and device optimization. In particular, fs-TAS is becoming increasingly popular in perovskite characterization studies, with commercial one-box pump-probe systems readily available as part of a researcher's toolkit. Although TAS is a powerful probe in the study of charge dynamics and recombination mechanisms, its instrumentation and data interpretation can be daunting even for experienced researchers. This issue is exacerbated by the sensitive nature of halide perovskites where the kinetics are especially susceptible to pump fluence, sample preparation and handling and even degradation effects that could lead to disparate conclusions. Nonetheless, with end-users having a clear understanding of TAS's capabilities, subtleties, and limitations, cutting-edge work with deep insights can still be performed using commercial setups as has been the trend for ubiquitous spectroscopy instruments like absorption, fluorescence, and transient photoluminescence spectrometers. Herein, we will first briefly examine the photophysical processes in lead halide perovskites, highlighting their novel properties. Next, we proceed to give a succinct overview of the fundamentals of pump-probe spectroscopy in relation to the spectral features of halide perovskites and their origins. In the process, we emphasize some key findings of seminal photophysical studies and draw attention to the interpretations that remain divergent and the open questions. This is followed by a general description into how we prepare and conduct the TAS characterization of CH3NH3PbI3 thin films in our laboratory with specific discussions into the potential pitfalls and the influence of thin film processing on the kinetics. Lastly, we conclude with our views on the challenges and opportunities from the photophysical perspective for the field and our expectations for systems beyond lead halide perovskites.

Layered 2D halide perovskites with their alternating organic and inorganic atomic layers that form a self‐assembled quantum well system are analogues of the purely inorganic 2D transition metal dichalcogenides. Within their periodic structures lie a hotbed of photophysical phenomena such as dielectric confinement effect, optical Stark effect, strong exciton–photon coupling, etc. Detailed understanding into the strong light–matter interactions in these hybrid organic–inorganic semiconductor systems remains modest. Herein, the intricate coherent interplay of exciton, spin, and phonon dynamics in (C6H5C2H4NH3)2PbI4 thin films using transient optical spectroscopy is explicated. New insights into the hotly debated origins of transient spectral features, relaxation pathways, ultrafast spin relaxation via exchange interaction, and strong coherent exciton–phonon coupling are revealed from the detailed phenomenological modeling. Importantly, this work unravels the complex interplay of spin–quasiparticle interactions in these layered 2D halide perovskites with large spin–orbit coupling.

High pressure (HP) can drive the direct sintering of nanoparticle assemblies for Ag/Au, CdSe/PbS nanocrystals (NCs). Instead of direct sintering for the conventional nanocrystals, this study experimentally observes for the first time high-pressure-induced comminution and recrystallization of organic-inorganic hybrid perovskite nanocrystals into highly luminescent nanoplates with a shorter carrier lifetime. Such novel pressure response is attributed to the unique structural nature of hybrid perovskites under high pressure: during the drastic cubic-orthorhombic structural transformation at ≈2 GPa, (301) the crystal plane fully occupied by organic molecules possesses a higher surface energy, triggering the comminution of nanocrystals into nanoslices along such crystal plane. Beyond bulk perovskites, in which pressure-induced modifications on crystal structures and functional properties will disappear after pressure release, the pressure-formed variants, i.e., large (≈100 nm) and thin (<10 nm) perovskite nanoplates, are retained and these exhibit simultaneous photoluminescence emission enhancing (a 15-fold enhancement in the photoluminescence) and carrier lifetime shortening (from ≈18.3 ± 0.8 to ≈7.6 ± 0.5 ns) after releasing of pressure from 11 GPa. This pressure-induced comminution of hybrid perovskite NCs and a subsequent amorphization-recrystallization treatment offer the possibilities of engineering the advanced hybrid perovskites with specific properties.

Two‐dimensional lead and tin halide perovskites were prepared by intercalating the long alkyl group 1‐hexadecylammonium (HDA) between the inorganic layers. We observed visible‐light absorption, narrow‐band photoluminescence, and nanosecond photoexcited lifetimes in these perovskites. Owing to their hydrophobicity and stability even in humid air, we applied these perovskites in the decarboxylation and dehydrogenation of indoline‐2‐carboxylic acids. (HDA)2PbI4 or (HDA)2SnI4 were investigated as photoredox catalysts for these reactions, and quantitative conversion and high yields were observed with the former.