Hal terpenting dalam perencanaan waduk selain desain hidrolis bendungan adalah sedimentasi. Sedimen yang mengendap di waduk merupakan faktor pembatas kapasitas tampungan efektif waduk, sehingga jumlah sedimen di waduk biasa digunakan untuk menetapkan masa guna waduk. Prediksi sedimentasi yang terjadi pada waduk dilakukan dengan memperhitungkan besar laju sedimentasi berdasarkan metode perhitungan analitik, namun untuk mempermudah dalam menggambarkan sedimentasi yang terjadi pada waduk dilakukan metode pemodelan menggunakan software HEC-RAS. Program HEC-RAS sendiri merupakan salah satu program pemodelan analisis angkutan sedimen pada saluran maupun sungai. Tujuannya adalah untuk memprediksi besar laju sedimentasi pada Waduk Tugu dengan metode perhitungan analitik dan pemodelan software HEC-RAS, kemudian kedua hasilnya dibandingkan. Pada perhitungan maupun pemodelan sedimentasi menggunakan HEC-RAS data yang dibutuhkan adalah data geometri sungai, data hidrolika, debit sungai, dan parameter sedimen. Pemodelan sedimentasi dengan HEC-RAS dilakukan dengan mencoba beberapa model. Pemodelan pertama berupa sungai dan tubuh bendung. Pemodelan kedua dengan penambahan ambang pelimpah. Pemodelan ketiga, sungai yang dimodelkan hanya alur sungai bagian hilir. Pemodelan keempat penambahan culvert sebagai saluran pengambilan. Pemodelan kelima dengan menambah lateral inflow pada hulu tubuh bendung sebagai alternatif lain untuk memodelkan saluran pengambilan. Pemodelan keenam sama dengan pemodelan keempat namun dengan debit inflow pertama yang dibesarkan sebagai asumsi bahwa waduk terisi penuh baru dioperasikan. Perhitungan analitik dihitung dengan metode total load Laursen yang juga digunakan dalam pemodelan HEC-RAS dan dihitung pada penampang melintang bagian hulu. Hasil perhitungan analitik berupa besar angkutan sedimen yang kemudian dibandingkan dengan pemodelan HEC-RAS. Angkutan sedimen hasil dari perhitungan analitik cenderung lebih kecil daripada hasil dari pemodelan HEC-RAS, dimana perkiraan besar laju sedimentasi dari metode pemodelan HEC-RAS sebesar 22.000 m 3 /th sedangkan laju sedimentasi hasil perhitungan analitik sebesar 19.400 m 3 /th. hal ini dikarenakan penyederhanaan geometri penampang pada perhitungan analitik, sedangkan geometri pada model lebih detail.
Saluran Irigasi Mataram adalah saluran irigasi yang menghubungkan Sungai Progo di Yogyakarta sebelah Barat dan Sungai Opak di Yogyakarta sebelah Timur. Meskipun letaknya strategis, namun potensi aliran air di Saluran Irigasi Mataram belum dimanfaatkan secara maksimal dalam hal pembangkit listrik tenaga air. Menurut kapasitas daya yang dihasilkan, ada beberapa macam pembangkit listrik tenaga air, salah satunya adalah Pembangkit Listrik Tenaga Mikrohidro. Pembangkit Listrik Tenaga Mikrohidro adalah pembangkit listrik skala kecil dengan daya kurang dari 100 KW. Tenaga air yang digunakan dapat berupa aliran sungai yang dibendung, air terjun, dan aliran air pada sistem irigasi. Ditinjau dari ketersediaan air di Saluran Irigasi Mataram, yaitu debit andalan 85% sebesar 1,7 m³/detik dan beda tinggi sebesar 3,56 meter, Saluran irigasi Mataram berpotensi untuk dibangun Pembangkit Listrik Tenaga Mikrohidro. Perencanaan Pembangkit Listrik Tenaga Mikrohidro ini berdasarkan pada studi literatur, survei lapangan, dan analisa data. Dari perencanaan Pembangkit Listrik Tenaga Mikrohidro ini akan menghasilkan daya sebesar 59,37 kW dan energi listrik yang dihasilkan sebesar 358938, 69 KWH per tahun.
Diajukan Diperbaiki DisetujuiKeywords: Irrigation System, budget, value of priority, value of benefit, linier programming.Blimbing Irrigation Area covers 319 Ha of agriculutural land. Damages were observed on irrigation system. This resulted in decreased function of irrigation system. Maintenace activities are required to restore the fuction of irrigation system. The purpose of thi research is to obtain optimal strategy of maintenance irirgation system on Blimbing Irrigation Area, while the constraint is the cost limitation. The initial phase is to identify and assess the damage on Blimbing Irrigation Area and make value of priority for maintenace irrigation. Then calculate Benefit and Cost to assess the feasibility maintenace activities. This research uses Linnier Programming method wich consist of objective functions and constraint functions. The objective function for this research is to maximize the value of priority or the value of benefits, while the constraint is the cost limitation. Reffers to the cost Rp. 100.000.000, the optimization was applied to maximimize the value of priority or the value of benefit. The results were 7 segment can be repaired with the budget of Rp. 99.998.887. Optimization result by maximized the priority value is the same as optimization result by maximized th benefit value.Kata kunci: jaringan irigasi, anggaran, nilai prioritas, nilai manfaat, linier programming. Abstrak Daerah Irigasi (DI) Blimbing mengairi lahan pertanian sebesar 319Ha. Kondisi fisik jaringan irigasi banyak mengalami kerusakan yang mengakibatkan menurunnya fungsi jaringan irigasi. Sehingga diperlukan pemeliharaan untuk mengembalikan fungsi jaringan irigasi ke kondisi semula. Tujuan dari penelitian ini adalah untuk memperoleh strategi pemeliharaan jaringan irigasi DI Blimbing yang optimal, dengan memperhatikan biaya. Tahap awal adalah mengidentifikasi, menilai kondisi fisik dan fungsi bangunan irigasi dan membuat urutan prioritas pemeliharaan jaringan irigasi. Kemudian menghitung Benefit and Cost untuk menilai kelayakan. Penelitian ini menggunakan Metode Linier Programming yang terdiri dari fungsi tujuan dan kendala. Sebagai fungsi tujuan adalah memaksimumkan nilai prioritas/nilai manfaat, sedangkan untuk fungsi kendala yaitu keterbatasan biaya. Mengacu biaya sebesar Rp. 100.000.000, permodelan/optimasi pemeliharaan yang dikaitkan untuk memaksimalkan nilai prioritas atau nilai manfaat diperoleh ruas yang dapat diperbaiki sebanyak 7 ruas dengan anggaran sebesar Rp. 99.998.877. Hasil optimasi dengan memaksimalkan nilai prioritas sama dengan hasil optimasi dengan memaksimalkan nilai manfaat.
This research was conducted to analyze balancing the storage capacity of the Bendo Reservoir with the quantity of water needed. Bendo Reservoir located in Nginden Sawo Village, Ponorogo Regency is one of the multipurpose reservoirs in Indonesia designed for irrigation, water supply, and simultaneously hydroelectric power. The water available is observed to be decreasing along with climate change, thereby, requiring an appropriate reservoir operational system. Several methods have been designed to achieve this purpose through the use of vast and complex variables but this study used a Dynamic Systems approach for analysis. Hhowever, involved the use of two scenarios in the simulation model to obtain the most optimum results. A period of 5 years was simulated and the result showed water shortage started in the 54th month for scenario 2, 49th month for scenario 1, and 46th month for the base model. Therefore, means scenario 2 has the most optimum conditions and recommended as the appropriate solution for Bendo Reservoir water distribution.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.