A flexible thermoelectric generator with overall dimensions of 16 × 20 × 0.05 mm has been fabricated using a unique low-cost procedure as part of our ongoing research efforts on developing economical and reliable energy sources for autonomous microsystems. The generator consists of a multiplicity of micro Sb-Bi thermocouple strips embedded in a 50 µm thick flexible epoxy film and is capable of generating a voltage of 0.25 V at a temperature difference of 30 K. Its fabrication involves only a few steps, such as foil lithography, electroplating, embedding and wet chemical etching. The exposure of aqueous photoresist on flexible foil substrates is carried out using a specially constructed mask aligner by Karl Süss GmbH. The thermocouple strips, with a cross section of 40 × 10 µm and a length of 20 mm, are electroplated galvanostatically from their associated acidic electrolytes into the patterned AZ 111XFS template on a 50 µm thick copper foil. After a top-over embedment of the electroplated structures with an epoxy film, the original copper substrate is removed completely by wet chemical etching, leaving the generator module to be embedded in the epoxy film. This process is proven to be cost-effective, easily manageable and highly reliable. It is now being applied to our current fabrication of more efficient thermoelectric generators based on n-and p-type Bi 2 Te 3 compound materials.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.