General rightsThis document is made available in accordance with publisher policies. Please cite only the published version using the reference above. Full terms of use are available: http://www.bristol.ac.uk/pure/about/ebr-terms ABSTRACT: A series of reactive blends, comprising a commercial benzoxazine monomer, 2,2- bis(3,4-dihydro-3-phenyl-2H-1,3-benzoxazine)propane, and bisphenol A is prepared andcharacterized. Thermal analysis and dynamic rheology reveal how the introduction of up to 15 wt % bisphenol A lead to a significant increase in reactivity (the exothermic peak maximum of thermal polymerization is reduced from 245 ºC to 215 ºC), with a small penalty in glass transition temperature (reduction of 15 K), but similar thermal stability (onset of degradation = 283 ºC, char yield = 26 %). With higher concentrations of bisphenol A (e.g. 25 wt %), a significantly more reactive blend is produced (exothermic peak maximum = 192 ºC), but with a significantly lower thermal stability (onset of degradation = 265 ºC, char yield = 22 %) and glass transition temperature (128 ºC). Attempts to produce a cured plaque containing 35 wt % bisphenol A were unsuccessful, due to brittleness. Molecular modelling is used to replicate successfully the glass transition temperatures (measured using thermal analysis) of a range of copolymers.

The Molecular Operating Environment software (MOE) is used to construct a series of benzoxazine monomers for which a variety of parameters relating to the structures (e.g. water accessible surface area, negative van der Waals surface area, hydrophobic volume and the sum of atomic polarizabilities, etc.) are obtained and quantitative structure property relationships (QSPR) models are formulated. Three QSPR models (formulated using up to 5 descriptors) are first used to make predictions for the initiator data set (n = 9) and compared to published thermal data; in all of the QSPR models there is a high level of agreement between the actual data and the predicted data (within 0.63–1.86 K of the entire dataset). The water accessible surface area is found to be the most important descriptor in the prediction of Tg. Molecular modelling simulations of the benzoxazine polymer (minus initiator) carried out at the same time using the Materials Studio software suite provide an independent prediction of Tg. Predicted Tg values from molecular modelling fall in the middle of the range of the experimentally determined Tg values, indicating that the structure of the network is influenced by the nature of the initiator used. Hence both techniques can provide predictions of glass transition temperatures and provide complementary data for polymer design.

No abstract

Molecular simulation is becoming an important tool for both understanding polymeric structures and predicting their physical and mechanical properties. In this study, temperature ramped molecular dynamics simulations are used to predict two physical properties (i.e., glass transition temperature and thermal degradation temperature) of a previously synthesised and published telechelic benzoxazine. Plots of simulated density versus temperature show decreases in density within the same temperature range as experimental values for the thermal degradation. The predicted value for the thermal degradation temperature for the cured polybenzoxazine based on the telechelic polyetherketone (PEK) monomer was ca. 400°C, in line with the experimental thermal degradation temperature range of 450°C to 500°C. Mechanical Properties of both the unmodified PEK and the telechelic benzoxazines are simulated and compared to experimental values (where available). The introduction of the benoxazine moieties are predicted to increase the elastic moduli in line with the increase of crosslinking in the system.