Electron beam (EB) curing is a high rate manufacturing technique for preparing of the epoxy composites. In this study, EB radiation was used to prepare carbon nanotubes (CNTs)/epoxy composites and the effects of 3-glycidoxypropyltrimethoxysilane (GPTMS) functionalized multi-walled carbon nanotubes (MWNTs) on the mechanical properties of EB cured MWNTs/epoxy composites were studied given the important effects on the composites performance of interfacial adhesion between the CNTs and epoxy. The results showed that a substantial increase of the Vicker’s hardness appeared at MWNTs content of 0.1 wt%, but further filler content increase led to insignificant changes. Also the tensile modulus of the 0.25 wt% GPTMS functionalized MWNTs (GPTMS-MWNTs)/epoxy composites was enhanced by 34.9%. Dynamic mechanical analysis studies revealed that filling the 0.25 wt% GPTMS-MWNTs into epoxy can produce an 18.4℃ (from 121.1℃ to 139.5℃) increase in Tg as well. It was concluded that GPTMS functionalization has a significant effect on the mechanical properties of MWNTs/epoxy composites.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.