A fuzzy-logic-based turn-off angle compensator for torque ripple reduction in a switched reluctance motor is proposed. The turn-off angle, as a complex function of motor speed and current, is automatically changed for a wide motor speed range to reduce torque ripple. Experimental results are presented that show ripple reduction when the turn-off angle compensator is used.

No abstract

Abstract-This paper presents a voltage sag compensator, which uses a flywheel energy storage system with superconducting magnetic axial thrust bearing (SMB) and a permanent magnet radial bearing (PMB). The SMB was built with Nd-Fe-B magnet and YBCO superconducting blocks, refrigerated with liquid Nitrogen. The magnets are assembled with magnetic flux shapers in order to increase the levitation force and the stiffness. The radial PMB is used to positioning the vertically arranged switched reluctance machine (SRM) used as motor/generator. Simulations of the power electronics and SRM show that the system can work up to 30,000 rpm supplying the required energy during disturbances.

No abstract

A new offline current modulation using a neuro-fuzzy compensation scheme for torque-ripple reduction in switched reluctance motors is presented. The main advantage of the proposed technique is that the torque signal is unnecessary. The compensating signal is learned prior to normal operation in a self-commissioning run, capturing the necessary current shape to reduce the torque ripple. Simulation results verify first the effects of speed and then load changes on the compensator performance. Implementation of the proposed technique in a laboratory prototype shows the feasibility and accuracy of the respective offline scheme.

No abstract

No abstract

This paper presents test results of a flywheel energy storage system (FESS) prototype. The bearing system is composed of a superconducting magnetic thrust bearing (SMB) and a permanent magnet bearing (PMB). The SMB was built with Nd-Fe-B magnet and YBCO superconducting blocks. The PMB has the function of positioning radially the switched reluctance machine (SRM) used as motor/generator and reduce the load over the SMB. The SRM drive is responsible to convert electrical into mechanical energy, and vice versa. The prototype still operates at low speeds, but the dynamical simulations of the SRM drive showed that the system can work at high speed, supplying the required energy during disturbances. In the tests performed with the FESS prototype, the system took or delivered energy from/to the grid when requested.