Using bacteria that tolerate fairly high sodium sulphate concentrations and reduce sulphate and a coarse clay with buffering properties as solid electrolytes, biological fuel cells have been developed for providing electrical energy discontinuously. The biologically active anodes, which accumulate fuel, contained a metal hydroxide catalyst that was converted during the biological process into a metal sulphide catalyst and functioned in a solidified aqueous electrolyte that contained sodium sulphate. The active carbon or titanium cathodes employed were activated with cobalt oxide spinels, molybdenum/vanadium compounds or metal chelates. When employed in continuous service for discontinuous energy consumption, fuel cells were capable of being operated with humus constituents or sugar waste as fuel over a period of 5 years without malfunction and maintenance. Positive results were achieved in the purification of waste-water with a modified type of fuel cell in which the production of energy was not dominant.

Redox electrodes made of passivated metals of the subgroups IV to VI of the periodic system with a surface coating of n-conducting metal oxides, generated by oxidizing agents or anodic oxidation, are well suited for measuring the concentration of oxidizing agents. Neither oxygen nor reducing agents affect the measurements. There is a correlation between the mean conductivity of the passive layer and its selectivity. The aged n-conducting passive layers permit reproducible potential settings, and the occurring changes in potential are greater than what is to be expected according to the Nernst equation. The potentiometric measuring of nitrosyl ions and chlorine is used as an example to demonstrate the selectivity of these electrodes.

No abstract