Here we report a facile approach to enhance the dispersibility of ethylene vinyl acetate copolymer (EVA)/silica nanocomposites (for the EVA/silica nanocomposites and interaction between silica nanoparticles (nanosilica) and EVA by adding EVA-g-acrylic acid (EVAgAA) as a compatibilizer, which was formed by grafting acrylic acid onto EVA chains with the aid of dicumyl peroxide). The above nanocomposites with and without EVAgAA were prepared by melt mixing in a Haake intermixer with different contents of silica and EVAgAA. Their structure and morphology were characterized by Fourier transform infra-red (FT-IR) spectroscopy, field emission scanning electron microscopy (FE-SEM), and the mechanical, rheological, dielectrical, and flammability properties of the nanocomposites were also investigated. The FT-IR spectra of the nanocomposites confirmed the formation of hydrogen bonds between the surface silanol groups of nanosilica and C=O groups of EVA and/or EVAgAA. The presence of EVAgAA remarkably increased the intensity of hydrogen bonding between nanosilica and EVA which not only enhanced the dispersion of nanosilica in EVA matrix but also increased the mechanical, viscosity and storage modulus of EVA/silica nanocomposites. In addition, the flammability of EVA/silica nanocomposites is also significantly reduced after the functionalization with EVAgAA. However, the mechanical properties of EVA/silica nanocomposites tended to level off when its content was above 1.5 wt.%. It has also been found that the dielectric constant value of the EVA/EVAgAA/silica nanocomposites is much lower than that of the EVA/silica nanocomposites, which is another evidence of the hydrogen bonding formation between EVAgAA and nanosilica.
Here we report on the modification of fly ash (FA) with vinyltriethoxysilane (VTES) in order to enhance the dispersibility and avoid the agglomeration. FA was treated with nitric acid before the modification with VTES. The structure of fly ash particles before and after the modification was characterized by several sophisticated techniques including Fourier transform infra-red spectrum (FT-IR), thermogravimetric analysis (TGA), field emission scanning electron microscopy (FE-SEM) and size distribution analysis. The obtained results show that the VTES was grafted successfully onto the surface of FA, which significantly changes the surface properties of FA. It was also found that the thermal stability of modified FA (MFA) is much higher than that of the FA treated only with nitric acid. The size of the FA particles can also be controlled from 0.2 to 1.5 µm with increasing the loading of VTES on the surface of FA from 1 to 2 wt.%, revealing highly mono-distribution and low agglomeration. However, the agglomeration of the particles is observed when the content of VTES on the surface of FA exceeds 2 wt.%.
The TiO2nanoparticles were used as a reinforcement to prepare nanocomposites with high density polyethylene (HDPE) by melt blending process. The original TiO2(ORT) was modified by 3-glycidoxypropyltrimethoxysilane (GPMS) to improve the dispersion into HDPE matrix. The FT-IR spectroscopy and FESEM micrographs of modified TiO2(GRT) demonstrated that GPMS successfully grafted with TiO2nanoparticles. The tensile test of HDPE/ORT and HDPE/GRT nanocomposites with various contents of dispersive particles indicated that the tensile strength and Young’s modulus of HDPE/GRT nanocomposites are superior to the values of original HDPE and HDPE/ORT nanocomposites. At 1 wt.% of GRT, the mechanical properties of nanocomposites were optimal. In DSC and TGA analyses, with the presence of GRT in the nanocomposites, the thermal stability significantly increased in comparison with pure HDPE and HDPE/ORT nanocomposites. The better dispersion of GRT in polymer matrix as shown in FESEM images demonstrated the higher mechanical properties of HDPE/GRT nanocomposites to HDPE/ORT nanocomposites.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.