Solar photovoltaic (PV) electricity has the potential to be a major energy solution, sustainably suitable for urban areas of the future. However, although PV technology has been projected as one of the most promising candidates to replace conventional fossil based power plants, the potential disadvantages of the PV panels end-of-life (EoL) have not been thoroughly evaluated. The current challenge concerning PV technology resides in making it more efficient and competitive in comparison with traditional fossil powered plants, without neglecting the appraisal of EoL impacts. Indeed, considering the fast growth of the photovoltaic market, started 30 years ago, the amount of PV waste to be handled and disposed of is expected to grow drastically. Therefore, there is a real 1 Corresponding author. need to develop effective and sustainable processes to address the needed recycle of the growing number of decommissioned PV panels. Many laboratory-scale or pilot industrial processes have been developed globally during the years by private companies and public research institutes to demonstrate the real potential offered by the recycling of PV panels. One of the tested up lab-scale recycling processes -for the crystalline silicon technology -is the thermal treatment, aiming at separating PV cells from the glass, through the removal of the EVA (Ethylene Vinyl Acetate) layer. Of course, this treatment may entail that some hazardous components, such as Cd, Pb, and Cr, are released to the environment, therefore calling for very accurate handling. To this aim, the sustainability of a recovery process for EoL crystalline silicon PV panels was investigated by means of Life Cycle Assessment (LCA) indicators. The overall goal of this paper was to compare two different EoL scenarios, by evaluating the environmental advantages of replacing virgin materials with recovered materials with a special focus on the steps and/or components that can be further improved. The results demonstrate that the recovery process has a positive effect in all the analyzed impact categories, in particular in freshwater eutrophication, human toxicity, terrestrial acidification and fossil depletion indicators. The main environmental benefits arise from the recovery of aluminum and silicon. In particular, the recovered silicon from PV waste panels would decrease the need for raw silicon extraction and refining in so lowering the manufacturing costs, and end-of-life management of PV panels.Moreover, the amount of the recovered materials (silicon, aluminum and copper, among others) suggests a potential benefit also under an economic point of view, based on present market prices.

No abstract

Twelve single chambered, air-cathode Tubular Microbial Fuel Cells (TMFCs) have been filled up with fruit and vegetable residues. The anodes were realized by means of a carbon fiber brush, while the cathodes were realized through a graphite-based porous ceramic disk with Nafion membranes (117 Dupont). The performances in terms of polarization curves and power production were assessed according to different operating conditions: percentage of solid substrate water dilution, adoption of freshwater and a 35mg/L NaCl water solution and, finally, the effect of an initial potentiostatic growth.All TMFCs operated at low pH (pH= 3.0 ± 0.5), as no pH amendment was carried out. Despite the harsh environmental conditions, our TMFCs showed a Power Density (PD) ranging from 20 to 55 mW/m 2 ·kg waste and a maximum CD of 20 mA/m 2 ·kg waste , referred to the cathodic surface. COD removal after a 28−day period was about 45%.The remarkably low pH values as well as the fouling of Nafion membrane very likely limited TMFC performances. However, a scale-up estimation of our reactors provides interesting values in terms of power production, compared to actual anaerobic digestion plants. These results encourage further studies to characterize the graphite-based porous ceramic cathodes and to optimize the global TMFC performances, as they may provide a valid and sustainable alternative to anaerobic digestion technologies.

No abstract

No abstract

Fuel cell technologies have several applications in stationary power production, such as units for primary power generation, grid stabilization, systems adopted to generate backup power, and combined-heat-and-power configurations (CHP). The main sectors where stationary fuel cells have been employed are (a) micro-CHP, (b) large stationary applications, (c) UPS, and IPS. The fuel cell size for stationary applications is strongly related to the power needed from the load. Since this sector ranges from simple backup systems to large facilities, the stationary fuel cell market includes few kWs and less (micro-generation) to larger sizes of MWs. The design parameters for the stationary fuel cell system differ for fuel cell technology (PEM, AFC, PAFC, MCFC, and SOFC), as well as the fuel type and supply. This paper aims to present a comprehensive review of two main trends of research on fuel-cell-based poly-generation systems: tracking the market trends and performance analysis. In deeper detail, the present review will list a potential breakdown of the current costs of PEM/SOFC production for building applications over a range of production scales and at representative specifications, as well as broken down by component/material. Inherent to the technical performance, a concise estimation of FC system durability, efficiency, production, maintenance, and capital cost will be presented.

No abstract

No abstract