Background Lactobacillus species produce biosurfactants that can contribute to the bacteria’s ability to prevent microbial infections associated with urogenital and gastrointestinal tracts and the skin. Here, we described the biological and physicochemical properties of biosurfactants produced by Lactobacillus jensenii P6A and Lactobacillus gasseri P65.ResultsThe biosurfactants produced by L. jensenii P6A and L. gasseri P65 reduced the water surface tension from 72 to 43.2 mN m−1 and 42.5 mN m−1 as their concentration increased up to the critical micelle concentration (CMC) values of 7.1 and 8.58 mg mL−1, respectively. Maximum emulsifying activity was obtained at concentrations of 1 and 5 mg mL−1 for the P6A and P65 strains, respectively. The Fourier transform infrared spectroscopy data revealed that the biomolecules consist of a mixture of carbohydrates, lipids and proteins. The gas chromatography-mass spectrum analysis of L. jensenii P6A biosurfactant showed a major peak for 14-methypentadecanoic acid, which was the main fatty acid present in the biomolecule; conversely, eicosanoic acid dominated the biosurfactant produced by L. gasseri P65. Although both biosurfactants contain different percentages of the sugars galactose, glucose and ribose; rhamnose was only detected in the biomolecule produced by L. jensenii P6A. Emulsifying activities were stable after a 60-min incubation at 100 °C, at pH 2–10, and after the addition of potassium chloride and sodium bicarbonate, but not in the presence of sodium chloride. The biomolecules showed antimicrobial activity against clinical isolates of Escherichia coli and Candida albicans, with MIC values of 16 µg mL−1, and against Staphylococcus saprophyticus, Enterobacter aerogenes and Klebsiella pneumoniae at 128 µg mL−1. The biosurfactants also disrupted preformed biofilms of microorganisms at varying concentrations, being more efficient against E. aerogenes (64%) (P6A biosurfactant), and E. coli (46.4%) and S. saprophyticus (39%) (P65 biosurfactant). Both strains of lactobacilli could also co-aggregate pathogens.ConclusionsThis report presents the first characterization of biosurfactants produced by L. jensenii P6A and L. gasseri P65. The antimicrobial properties and stability of these biomolecules indicate their potential use as alternative antimicrobial agents in the medical field for applications against pathogens that are responsible for infections in the gastrointestinal and urogenital tracts and the skin.
New bioemulsifier-producing yeasts were isolated from the biological wastewater treatment plant of a dairy industry. Of the 31 bioemulsifier-producing strains, 12 showed emulsifying activity after 2months of incubation, with E(24) values ranging from 7% to 78%. However, only Trichosporon loubieri CLV20, Geotrichum sp. CLOA40, and T. montevideense CLOA70 exhibited high emulsion-stabilizing capacity, with E(24) values of 78%, 67%, and 66%, respectively. These isolates were shown to induce a strong emulsion stabilizing activity rather than the reduction of the interfacial tension. These strains exhibited similar growth rates in the exponential growth phase, with a clear acceleration after 24h and stabilization of the activity after 144h. Emulsification and stability properties of the bioemulsifiers were compared to those of commercial surfactants after the addition of NaCl and exposure to temperature of 100 degrees C. The compounds produced by the isolates appeared to be lipid-polysaccharide complexes. Gas chromatograph analysis of the lipidic fraction of the bioemulsifiers from CLV20, CLOA40, and CLOA70 shows the prevalence of (9Z,12Z)-octadeca-9,12-dienoic acid, in concentrations of 42.8%, 25.9%, and 49.8%, respectively. The carbohydrate composition, as determined by GC-MS of their alditol acetate derivatives, showed a predominance of mannose, galactose, xylose and arabinose.
Bacterial extracellular polymeric substances (EPSs) present diverse properties of biotechnological interest, such as surface modification, metal adsorption and hydrophobic substances solubilization through surface tension reduction. Thus, there is a growing demand for new producing strains and structurally variable biomolecules with different properties. One approach for scanning this biodiversity consists of exploring environments under selective pressures. The aim of this study was to evaluate the composition of culturable heterotrophic bacterial communities from five different sites from a copper mine in the Amazon biome by an enrichment technique to obtain metal resistant bacteria (lead, arsenic, cadmium, copper and zinc) capable of producing EPSs. The bacterial densities at the sites varied from 2.42 × 103 to 1.34 × 108 NMP mL−1 and the 77 bacterial isolates obtained were classified in four divisions, β-Proteobacteria (16.88%), γ-Proteobacteria (7.29%), Firmicutes (61%) and Actinobacteria (12.98%). Bacillus, Alcaligenes, and Lysinibacillus were the most dominant among the 16 observed genera, but the relative frequency of each varied according to the sample and the metal used in the enrichment culture. 58% of the bacterial strains (45) could produce EPSs. From these, 33 strains showed emulsifying activity (E24), and 9 of them reached values higher than 49%. Only Actinomyces viscosus E3.Pb5 and Bacillus subtilis group E3.As2 reduced the medium surface tension to values lower than 35 mN m−1. It was possible to confirm the high presence of bacteria capable of producing EPSs with tensoactive properties in Amazon copper mines and the evolutionary pressure exerted by the heavy metals during enrichment. These molecules can be tested as an alternative for use in processes that involve the removal of metals, such as the bioremediation of contaminated environments.
BackgroundThe microbial bioemulsifiers was surface active compounds, are more effective in stabilizing oil-in-water emulsions. The yeasts have been isolated to produce bioemulsifiers from vegetable oils and industrial wastes.ResultsTrichosporon mycotoxinivorans CLA2 is bioemulsifier-producing yeast strain isolated from effluents of the dairy industry, with ability to emulsify different hydrophobic substrates. Bioemulsifier production (mg/L) and the emulsifying activity (E24) of this strain were optimized by response surface methodology using mineral minimal medium containing refinery waste as the carbon source, which consisted of diatomaceous earth impregnated with esters from filters used in biodiesel purification. The highest bioemulsifier production occurred in mineral minimal medium containing 75 g/L biodiesel residue and 5 g/L ammonium sulfate. The highest emulsifying activity was obtained in medium containing 58 g/L biodiesel refinery residue and 4.6 g/L ammonium sulfate, and under these conditions, the model estimated an emulsifying activity of 85%. Gas chromatography and mass spectrometry analysis suggested a bioemulsifier molecule consisting of monosaccharides, predominantly xylose and mannose, and a long chain aliphatic groups composed of octadecanoic acid and hexadecanoic acid at concentrations of 48.01% and 43.16%, respectively. The carbohydrate composition as determined by GC-MS of their alditol acetate derivatives showed a larger ratio of xylose (49.27%), mannose (39.91%), and glucose (10.81%). 1 H NMR spectra confirmed by COSY suggested high molecular weight, polymeric pattern, presence of monosaccharide’s and long chain aliphatic groups in the bioemulsifier molecule.ConclusionsThe biodiesel residue is an economical substrate, therefore seems to be very promising for the low-cost production of active emulsifiers in the emulsification of aromatics, aliphatic hydrocarbons, and kerosene.
The objective of this study was to evaluate the capability of a lipopolysaccharide, produced by Trichosporon mycotoxinivorans CLA2 using residue of biodiesel processing, to flocculate two different solids in suspension. In addition, the emulsifying activity and the stability of this lipopolysaccharide in response to pH and temperature variations and in the presence of some electrolytes were evaluated. The lipopolysaccharide was used in concentrations ranging from 20 to 80 mgL to flocculate 100 gL of kaolin and 50 gL of charcoal. The results indicated that the flocculating capability for each suspended particles reached 80 % and 78.79 % after 14 min, respectively. Other tests indicated that the emulsifying activity is weakly affected by temperature, pH and NaCl. In addition, the surfactant activity was assessed by the droplet diameter method and tension surface measurement. The surface tension of pure water decreased gradually with an increase in the biopolymer concentration until a minimum of 52 m Nm with a CMC value of 4.54 mgL. These findings demonstrated a potential use of the bioemulsifier in flocculation and emulsification processes, which are also favored by its reduced toxicity compared to those of widely used commercial polymers.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.