Представлены основы технологии переработки фрагментов крупнотоннажных растительных отходов предприятий Мьянмы в виде скорлупы орехов кокоса и косточек сливы, древесины бирманского железного дерева, оболочек семян манго, рисовой шелухи и гуза-паи – полевых остатков возделывания хлопчатника на активные угли методом их пиролиза и активации карбонизатов водяным паром. Охарактеризованы технические показатели полученных в оптимальных условиях целевых продуктов и сопоставительные результаты эффективности их использования при очистке сточных вод игазовых выбросов.
Описан способ получения и охарактеризована пористая структура минерально-углеродных адсорбентов на основе двух видов силикагеля и отходов полиэтилена, полипропилена и полиуретана. Представлены изотермы низкотемпературной адсорбции ими азота, по которым рассчитаны размеры, удельный объём и поверхность микро- и мезопор. Показано, что при пиролизе указанных полимеров мезопористая структура адсорбентов меняется незначительно, а микропористая структура сохраняется только с крупнопористым силикагелем, являющимся более подходящей минеральной основой.
Для очистки сточных вод от поверхностно-активных веществ (ПАВ) используют различные методы, например, электрoфлотокоагуляцию и тот же метод, дополненный нанофильтрацией. Авто-рами работы было предложено использовать сочетание адсорбции и коагуляции с добавками неболь-ших доз флокулянтов для обеспечения хорошего эффекта очистки от ПАВ и взвешенных веществ и снижения затрат.Для опытов использовали природную монтмориллонитовую глину Асканского месторождения (Грузия). Модельный раствор стоков прачечных содержал 1 г/дм3 как анионных, так и неионогенных ПАВ. В качестве имитатора мутности в модельный раствор вносили белый каолин (0.2 г/дм3). Органи-ческие примеси моделировали дополнительным введением сахара (100 мг/дм3). Показано, что для до-стижения высокой степени очистки исследуемых стоков с помощью глины требуется длительный пе-риод контакта фаз и высокие дозы адсорбента. В следующей серии опытов в модельный раствор до-бавляли коагулянт – раствор FeCl2, флокулянт и глину в количестве 2 г/дм3. Добавка глины играла не только роль эффективного адсорбента, но и утяжелителя осадка коагулянта.Эффективность коагуляционной очистки в сочетании с использованием глины оценивали по остаточной концентрации общего и органического углерода (ООУ) очищенного раствора, ХПК очи-щенного модельного раствора, сухого и прокаленного остатка, содержание взвешенных веществ и оста-точной концентрации общего железа, а также величине рН исходного и очищенного растворов.При сравнении применения сухой бентонитовой глины и её 10%-ной суспензии в воде установлено, что при добавлении сухой глины укрупнение осадка и осветление жидкой фазы происходит с большей скоростью, а также очистка от органических примесей достигает 56 отн. %, а взвешенных веществ – 90 отн. %.На основании проведенных исследований можно сделать вывод об успешности проведения коагуляции с добавками Асканской бентонитовой глины для предварительной очистки стоков прачечных с возможностью утилизации образующегося осадка без промежуточной сушки в технологии углеродминеральных адсорбентов-катализаторов
The complexes of copper with sodium tartrate, Trilon B and citric acid, present for example in rinsing water of galvanic industry, because of their resistance they are a challenge to extract by chemical methods, while their emission rezults in environmental and economic damages. Proposed for their extraction ion exchange was carried out with anion-exchange resins Purofine PFA600, AV-17-8 of gel type and Purolite A500, ChFO of macroporous type. At purifying of initial solutions with copper concentration of 10 mg/l under static conditions according to atomic absorption spectrometry the degree of purification 95.4-99.9% was found for all ion-exchangers. The study of equilibrium of ion exchange of named complexes from solutions with copper concentration of 10-100 mg/l by various ion exchangers has identified different types of isotherms, mostly approximated by the Langmuir and Freundlich models, and calculated parameters provide comparison of selectivity and static exchange capacity of the absorbents. Calculated limiting capacity of the macroporous ion-exchanger is reduced in row of ligands: sodium tartrate > Trilon B > citric acid; it is maximal for copper-tartrate complex for Purofine PFA600. Considering the regeneration ability studied ion-exchangers are promising for deep extraction of copper-organic complexes from dilute solutions, but need determination of dynamic and kinetic characteristics of this process.Forcitation:Burminova V.S., Nistratov A.V., Klushin V.N. Equilibrium of ion-exchange extraction of copper-organic complexes from rinsing water. Izv. Vyssh. Uchebn. Zaved. Khim. Khim. Tekhnol. 2018. V. 61. N 1. P. 96-101
The possibility of processing wastes based on organoplastics generated at aviation enterprises into activated carbons by chemical activation using potassium hydroxide has been investigated. Powdered and granular activated carbons with a porous structure, characterized by the predominance of micropores or mesopores, are obtained that are superior in many respects to both adsorbents based on organoplastics and most industrial active carbons. The specific surface area of micropores of the obtained granular activated carbons is 1716 m2/g, the absorption capacity is 365 mg/g for methylene blue and 1180 mg/g for iodine. The obtained granular activated carbons are characterized by a stable adsorption value of n-butanol (about 400 mg/g) during three successive adsorption-regeneration cycles. Desorption at 120±5 °C provides an almost complete restoration of the activity of this absorber, fundamentally allowing its multiple use in this technology. It is shown in the work that granular activated carbons of very high quality can be obtained by chemical activation with potassium hydroxide based on organoplastics wastes, the only drawback of which is, in essence, the relatively low (at 60%) abrasion resistance. The possibility of improving the quality properties of granular activated carbons by adding a small amount of carbon fiber (1% of the mass) as a reinforcing component in the process of granulation to raw paste was investigated. The specified method can significantly increase the strength of the granules in compression (about 3 times), while the adsorption properties of activated carbon are practically unchanged. The properties described above allow us to conclude that the obtained granular activated carbon is effective and highly competitive.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.