We demonstrate a method to synthesize ultra-high repetition rate bursts of ultrashort laser pulses containing any number of pulses within a burst with identical pulse separation and adjustable amplitude. The key element to synthesize the GHz bursts of ultrashort laser pulses is an active fiber loop. The method was implemented in the fiber chirped pulse amplification system to obtain 72 nJ-energy bursts of 20 pulses with a 2.65 GHz intra-burst pulse repetition rate and a 500 kHz burst repetition rate. The dispersion compensation mechanism ensured a mean pulse duration of 570 fs within the bursts.
We present implementation of the energy-efficient and flexible laser beam shaping technique in a high-power and high-energy laser amplifier system. The beam shaping is based on a spatially variable wave plate (SVWP) fabricated by femtosecond laser nanostructuring of glass. We reshaped the initially Gaussian beam into a super-Gaussian (SG) of the 12th order with efficiency of about 50%. The 12th order of the SG beam provided the best compromise between large fill factor, low diffraction on the edges of the active media, and moderate intensity distribution modification during free-space propagation. We obtained 150 mJ pulses of 532 nm radiation. High-energy, pulse duration of 85 ps and the nearly flat-top spatial profile of the beam make it ideal for pumping optical parametric chirped pulse amplification systems.
Laser sources which produce GHz bursts of ultrashort pulses attract a lot of attention by demonstrating superior performance in material processing. Flexibility of the laser source in a selection of parameters for custom application is highly preferable. In this work, we demonstrate a very versatile method for burst formation using the active fiber loop (AFL). It allows forming GHz bursts containing from 2 up to approximately 2200 pulses in a burst (1000 ns burst width) with identical pulse separation and any predefined intra-burst pulse repetition rate (PRR). The burst pre-shaping by the amplification conditions in the AFL and by the modulation of transmission of the acousto-optic modulator was demonstrated. Industrial-grade ultrafast laser system was able to operate in the single-pulse and GHz-burst regimes. The laser system delivered high-quality 368 fs duration (FWHM) pulses of 15.3 µJ pulse energy and 30.6 W average output power at 2 MHz PRR in the single-pulse regime. In the GHz-burst operation regime, bursts of 2.2 GHz intra-burst repetition rate were formed and amplified to more than 30 W average output power with a burst energy up to 135 µJ at a burst repetition rate of 200 kHz. The sub-picosecond duration of pulses was obtained in the GHz-burst regime at different burst widths.
Chirped pulse amplification (CPA) technique was realized in Nd:YVO4 and Nd:YAG amplifiers. The front-end of the system consists of an Yb-doped fiber-optic master oscillator and a chirped fiber Bragg grating stretcher with a chain of Nd-based solid-state amplifiers followed by a grating compressor with custom high-dispersion multilayer dielectric gratings. This allowed us to implement a relatively compact and moderately complex master oscillator power amplifier (MOPA) layout. 85 mJ of sub-20 ps pulses at 1 kHz repetition rate was obtained at the output. The amplifier features favourable parameters for OPCPA pumping.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.