We present accurate time delays for the quadruply imaged quasar HE 0435-1223. The delays were measured from 575 independent photometric points obtained in the R-band between January 2004 and March 2010. With seven years of data, we clearly show that quasar image A is affected by strong microlensing variations and that the time delays are best expressed relative to quasar image B. We measured Δt BC = 7.8 ± 0.8 days, Δt BD = −6.5 ± 0.7 days and Δt CD = −14.3 ± 0.8 days. We spacially deconvolved HST NICMOS2 F160W images to derive accurate astrometry of the quasar images and to infer the light profile of the lensing galaxy. We combined these images with a stellar population fitting of a deep VLT spectrum of the lensing galaxy to estimate the baryonic fraction, f b , in the Einstein radius. We measured f b = 0.65 The spectrum also allowed us to estimate the velocity dispersion of the lensing galaxy, σ ap = 222 ± 34 km s −1 . We used f b and σ ap to constrain an analytical model of the lensing galaxy composed of an Hernquist plus generalized NFW profile. We solved the Jeans equations numerically for the model and explored the parameter space under the additional requirement that the model must predict the correct astrometry for the quasar images. Given the current error bars on f b and σ ap , we did not constrain H 0 yet with high accuracy, i.e., we found a broad range of models with χ 2 < 1. However, narrowing this range is possible, provided a better velocity dispersion measurement becomes available. In addition, increasing the depth of the current HST imaging data of HE 0435-1223 will allow us to combine our constraints with lens reconstruction techniques that make use of the full Einstein ring that is visible in this object. Key words. cosmological parameters -gravitational lensing: strong Based on observations made with the 1.2 m Euler Swiss Telescope, the 1.5 m telescope of Maidanak Observatory in Uzbekistan, and with the 1.2 m Mercator Telescope, operated on the island of La Palma by the Flemish Community, at the Spanish Observatorio del Roque de los

Gravitationally lensed quasars can be used as powerful cosmological and astrophysical probes. We can (i) infer the Hubble constant H 0 based on the so-called time-delay technique, (ii) unveil substructures along the line-of-sight toward distant galaxies, and (iii) compare the shape and the slope of baryons and dark matter distributions in the inner regions of galaxies. To reach these goals, we need highaccuracy astrometry of the quasar images relative to the lensing galaxy and morphology measurements of the lens. In this work, we first present new astrometry for 11 lenses with measured time delays, namely, JVAS B0218+357, SBS 0909+532, RX J0911.4+0551, FBQS J0951+2635, HE 1104-1805, PG 1115+080, JVAS B1422+231, SBS 1520+530, CLASS B1600+434, CLASS B1608+656, and HE 2149-2745. These measurements proceed from the use of the Magain-Courbin-Sohy (MCS) deconvolution algorithm applied in an iterative way (ISMCS) to near-IR HST images. We obtain a typical astrometric accuracy of about 1-2.5 mas and an accurate shape measurement of the lens galaxy. Second, we combined these measurements with those of 14 other lensing systems, mostly from the COSMOGRAIL set of targets, to present new mass models of these lenses. The modeling of these 25 gravitational lenses led to the following results: 1) in four double-image quasars (HE0047-1746, J1226-006, SBS 1520+530, and HE 2149-2745), we show that the influence of the lens environment on the time delay can easily be quantified and modeled, hence putting these lenses with high priority for time-delay determination; 2) for quadruple-image quasars, the difficulty often encountered in reproducing the image positions to milli-arcsec accuracy (astrometric anomaly problem) is overcome by explicitly including the nearest visible galaxy/satellite in the lens model. However, one anomalous system (RXS J1131-1231) does not show any luminous perturber in its vicinity, and three others (WFI 2026-4536, WFI 2033, and B2045+265) have problematic modeling. These four systems are the best candidates for a pertubation by a dark matter substructure along the line-of-sight; 3) we revisit the correlation between the position angle (PA) and ellipticity of the light and of the mass distribution in lensing galaxies. As in previous studies, we find a significant correlation between the PA of the light and of the mass distributions. However, in contrast with these same studies, we find that the ellipticity of the light and of the mass also correlate well, suggesting that the overall spatial distribution of matter is not very different from the baryon distribution in the inner ∼5 kpc of lensing galaxies. This offers a new test for high-resolution hydrodynamical simulations.

Abstract. We present here a new robotic telescope called TRAPPIST 1 (TRAnsiting Planets and PlanetesImals Small Telescope). Equipped with a high-quality CCD camera mounted on a 0.6 meter light weight optical tube, TRAPPIST has been installed in April 2010 at the ESO La Silla Observatory (Chile), and is now beginning its scientific program. The science goal of TRAPPIST is the study of planetary systems through two approaches: the detection and study of exoplanets, and the study of comets. We describe here the objectives of the project, the hardware, and we present some of the first results obtained during the commissioning phase. The TRAPPIST projectThe hundreds of exoplanets known today allow us to put our own solar system in the broad context of our galaxy. In particular, the subset of known exoplanets that transit their parent stars are key objects for our understanding of the formation, evolution and properties of planetary systems. On the other hand, the objects of our own solar system are and will remain exquisite guides for helping us understand the mechanisms of planetary formation and evolution. Notably, comets are most probably remnants of the initial population of planetesimals of the outer part of the protoplanetary disk, and therefore, the study of their physical and chemical properties makes possible a thorough understanding of the conditions that prevailed during the formation of our four giant planets.Installed on April 2010 at the ESO La Silla Observatory (Chile), our new telescope TRAPPIST (TRAnsiting Planets and PlanetesImals Small Telescope) is fully dedicated to the study of planetary systems. More specifically, its science goals are the following: (1) The photometric search for transits of planets detected by radial velocities (RV). TRAPPIST was designed to be precise enough to detect the transit of a Neptune-size planet in front of a solar-type star, and the transit of a 'super-Earth' in front of a red dwarf. (2) The photometric follow-up of planet candidates found by the transit surveys CoRoT and WASP. (3) The characterization of confirmed transiting 1 For more details about TRAPPIST, see http//www.astro.ulg.ac.be/sci/Trappist

Gravitationally lensed quasars can be used to map the mass distribution in lensing galaxies and to estimate the Hubble constant H 0 by measuring the time delays between the quasar images. Here we report the measurement of two independent time delays in the quadruply imaged quasar WFI J2033−4723 (z = 1.66). Our data consist of R-band images obtained with the Swiss 1.2 m EULER telescope located at La Silla and with the 1.3 m SMARTS telescope located at Cerro Tololo. The light curves have 218 independent epochs spanning 3 full years of monitoring between March 2004 and May 2007, with a mean temporal sampling of one observation every 4th day. We measure the time delays using three different techniques, and we obtain Δt B−A = 35.5 ± 1.4 days (3.8%) and Δt B−C = 62.6 + 4.1 − 2.3 days ( + 6.5% − 3.7% ), where A is a composite of the close, merging image pair. After correcting for the time delays, we find R-band flux ratios of F A /F B = 2.88 ± 0.04, F A /F C = 3.38 ± 0.06, and F A1 /F A2 = 1.37 ± 0.05 with no evidence for microlensing variability over a time scale of three years. However, these flux ratios do not agree with those measured in the quasar emission lines, suggesting that longer term microlensing is present. Our estimate of H 0 agrees with the concordance value: non-parametric modeling of the lensing galaxy predicts H 0 = 67 (68% confidence level). More complex lens models using a composite de Vaucouleurs plus NFW galaxy mass profile show twisting of the mass isocontours in the lensing galaxy, as do the non-parametric models. As all models also require a significant external shear, this suggests that the lens is a member of the group of galaxies seen in field of view of WFI J2033−4723.

Aims. We attempt to place very accurate positional constraints on seven gravitationally lensed quasars currently being monitored by the COSMOGRAIL collaboration, and shape parameters for the light distribution of the lensing galaxy. We attempt to determine simple mass models that reproduce the observed configuration and predict time delays. We finally test, for the quads, whether there is evidence of astrometric perturbations produced by substructures in the lensing galaxy, which may preclude a good fit with the simple models. Methods. We apply the iterative MCS deconvolution method to near-IR HST archival data of seven gravitationally lensed quasars. This deconvolution method allows us to differentiate the contributions of the point sources from those of extended structures such as Einstein rings. This method leads to an accuracy of 1-2 mas in the relative positions of the sources and lens. The limiting factor of the method is the uncertainty in the instrumental geometric distortions. We then compute mass models of the lensing galaxy using state-of-the-art modeling techniques. Results. We determine the relative positions of the lensed images and lens shape parameters of seven lensed quasars: HE 0047-1756, RX J1131-1231, SDSS J1138+0314, SDSS J1155+6346, SDSS J1226-0006, WFI J2026-4536, and HS 2209+1914. The lensed image positions are derived with 1-2 mas accuracy. Isothermal and de Vaucouleurs mass models are calculated for the whole sample. The effect of the lens environment on the lens mass models is taken into account with a shear term. Doubly imaged quasars are equally well fitted by each of these models. A large amount of shear is necessary to reproduce SDSS J1155+6346 and SDSS J1226-006. In the latter case, we identify a nearby galaxy as the dominant source of shear. The quadruply imaged quasar SDSS J1138+0314 is reproduced well by simple lens models, which is not the case for the two other quads, RX J1131-1231 and WFI J2026-4536. This might be the signature of astrometric perturbations caused by massive substructures in the galaxy, which are unaccounted for by the models. Other possible explanations are also presented.