In this paper, we report the effect of doping sodium iodide (NaI) salt into a polymer blend matrix of sodium carboxymethyl cellulose (NaCMC) and poly(vinyl alcohol) (PVA). Solution casting approach was used to prepare solid polymer electrolyte (SPE) films. The films were characterized by Fourier-transform infrared spectroscopy (FTIR), X-Ray diffraction (XRD), electrical impedance spectroscopy, thermogravimetric analysis (TGA), and differential scanning calorimetry (DSC). XRD showed that NaI incorporation decreased the crystallinity of NaCMC/PVA-based SPE. FTIR technique confirmed the complexation of salt with polymer matrix due to the formation of the coordination bond between Na+ and –OH group and hydrogen bond between I− and –CH group. The sample with 30 wt% NaI showed the highest conductivity of 2.52 × 10–3 S cm−1, strongly influenced by the highest charge concentration $$(n)$$
(
n
)
, not its mobility (μ). DSC analysis revealed an increase in glass transition temperature $$({T}_{g})$$
(
T
g
)
with increasing salt content. TGA studies showed a decrease in thermal stability with salt inclusion. The transference number was found to be 0.99 for the highest conducting sample showing the primary charge carriers are ions. The highest conducting sample exhibited a mechanical strength of 15.42 MPa at room temperature, and it has been used to fabricate a battery to evaluate its suitability in energy storage devices.
Graphical abstract
Graphical abstract created with https://biorender.com.
In this research, nanocomposite solid polymer electrolytes (NCSPEs) comprising methylcellulose/pectin (MC/PC) blend as host polymer, ammonium chloride (NH4Cl) as an ion source, and zinc oxide nanoparticles (ZnO NPs) as nanofillers were synthesized via a solution cast methodology. Techniques such as Fourier transform infrared (FTIR), electrical impedance spectroscopy (EIS), and linear sweep voltammetry (LSV) were employed to characterize the electrolyte. FTIR confirmed that the polymers, NH4Cl salt, and ZnO nanofiller interact with one another appreciably. EIS demonstrated the feasibility of achieving a conductivity of 3.13 × 10−4 Scm−1 for the optimum electrolyte at room temperature. Using the dielectric formalism technique, the dielectric properties, energy modulus, and relaxation time of NH4Cl in MC/PC/NH4Cl and MC/PC/NH4Cl/ZnO systems were determined. The contribution of chain dynamics and ion mobility was acknowledged by the presence of a peak in the imaginary portion of the modulus study. The LSV measurement yielded 4.55 V for the comparatively highest conductivity NCSPE.
In this present work, we have synthesized silver nanoparticles (AgNPs) using the chemical reduction method and systematically studied the effect of AgNPs of different loading into polyvinyl alcohol/sodium bromide (PVA/NaBr) polymer electrolytes. X‐ray diffraction and Fourier transform infrared spectroscopy confirmed the variation in the crystallinity and complexation with AgNPs loading, respectively. AgNPs are uniformly distributed in the polymer matrix as depicted in FESEM. According to transport property studies, it is observed that carrier concentration has a strong influence on ionic conductivity. Additionally, I‐t studies showed that most charge carriers are ions and not electrons. The sample PVA/NaBr with AgNPs, prepared from 6 mM AgNO3 solution (PNAg6) with ionic conductivity 1.22 × 10−4 S cm−1 (one order increase with respect to undoped sample) and highest electrochemical stability window (ESW) of 2.86 V, can be chosen as a suitable candidate for energy storage device applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.