RESUMO Os setores da construção civil, indústria moveleira, indústria de papel e celulose buscam novas alternativas para uma utilização mais racional da madeira que possam diminuir as limitações de seu uso, a exemplo da produção dos painéis reconstituídos dessa matéria-prima, como compensados, aglomerados de partículas, sarrafos, MLC (Madeira Laminada Colada), entre outros. No presente trabalho buscou-se avaliar a eficiência da colagem em taliscas de madeira de Eucalyptus cloeziana preservadas quimicamente com Arseniato de Cobre Cromatado (CCA). Foram utilizados seis adesivos (MUF: melamina-ureia-formaldeído; PVA: poliacetato de polivinila; RF: resorcinol-formaldeído; TF: tanino-formaldeído; UF: ureia-formaldeído; PUR: poliuretano à base de mamona) e foram realizadas avaliações da interface madeira-adesivo por meio de fotomicrografias, da resistência ao cisalhamento, da porcentagem de falhas na madeira e mensuração da espessura da linha de cola. Para a visualização da interface madeira-adesivo retiraram-se cortes anatômicos de cada posição, plano transversal e plano longitudinal da junta colada, após amolecimento em água quente. Apenas nas taliscas unidas com TF não foi possível avaliar a interface. O CCA contribuiu de forma negativa nas propriedades físicas e mecânicas da madeira. O MUF apresentou os melhores resultados, representados por maiores penetrações do adesivo no material utilizado e consequentemente maiores valores de resistência ao cisalhamento e menores valores de delaminação.
ResumoAvaliou-se a influência das características anatômicas no desempenho da adesão da madeira de Vatairea sp., Paulownia sp., Aspidosperma populifolium e Tectona grandis. De pranchas Research, Society and Development, v. 9, n. 4, e31942727, 2020 (CC BY 4.0) | ISSN 2525-3409 | DOI: http://dx.doi.org/10.33448/rsd-v9i4.2727 2 orientadas tangencialmente, foram produzidos corpos de prova para as análises anatômica e físico-mecânica da madeira. Os tratamentos foram juntas coladas de peças de mesmo plano de corte (radial e tangencial), avaliados quanto a resistência ao cisalhamento e falha na linha de cola. A madeira de angelim apresentou a maior massa específica aparente (0,74 g cm-3) e a madeira de kiri (0,34 g cm-3) o menor valor. A espécie peroba mica apresentou a maior resistência ao cisalhamento na linha de cola nas faces tangencial e radial. As características anatômicas com maior influência no processo de adesão da madeira foram as células de raios e as fibras, que exibiram as maiores correlações com a resistência ao cisalhamento na linha de cola.Palavras-chave: Adesivo; Linha de cola; Planos de corte; Resistência ao cisalhamento. AbstractThe aim of this study was to evaluate the influence of anatomical characteristics on the adhesion performance of Vatairea sp., Paulownia sp., Aspidosperma populifolium and Tectona grandis wood. Specimens for anatomical, physical and mechanical analyzes were produced from tangentially oriented boards. The treatments were joint glued from pieces of the same anatomical orientation (radial and tangential), evaluated for shear strength and glue line failure. The Vatairea sp wood had the highest specific gravity (0.74 g cm-3) and the Paulownia sp (0.34 g cm-3) wood was smaller. Aspidosperma populifolium species showed the highest shear strength in the glue line in the tangential and radial faces. The anatomical variables with higher influence on the wood adhesion process were pith ray cells and especially fibers that exhibit the greatest correlation with the shear strength of the glue line.
Os cuidados necessários para o manuseio de serra circular e serra destopadeira são indispensáveis para a redução de acidentes e maior ganho em produtividade. Pensando nesta questão, o trabalho desenvolvido propôs pesquisar, testar e comparar formas rápidas e baratas que permitam adaptar dispositivos que evitem acidentes sem reduzir a produtividade, requisito básico para o aumento do bem-estar do indivíduo e aumento da competitividade da empresa. Entretanto, a atividade de operação de equipamentos industriais, como serras, típicas do segmento, tem mostrado uma face terrível, ao ser um dos principais contribuintes para a incapacitação de muitos trabalhadores, seja pela perda de horas trabalhadas, seja pela real amputação de partes dos membros humanos superiores. O estudo focaliza os municípios do entorno de Jerônimo Monteiro-ES, inclusive com a comparação dos índices existentes na região em relação a números relatados em pesquisas realizadas em outros Estados da Federação.
RESUMO Esta pesquisa teve como objetivo avaliar a utilização de serragem proveniente do seccionamento transversal de toras de eucalipto de uma destopadeira para produção de painéis aglomerados. Foram produzidos painéis com densidade nominal de 0,60 g.cm-3 e partículas que passassem pela peneira de 2 mm e ficassem retidas na peneira de 1,5 mm. Foi utilizado o adesivo ureia formaldeído puro e em associação com uma solução de tanino comercial de Acacia mearnsii (1:1) com água destilada. Aplicou-se às partículas adesivo nas proporções de 0%, 2%, 5%, 10% e 15% em substituição ao adesivo químico comercial. As seguintes propriedade físicas e mecânicas dos painéis foram analisadas: absorção de água após 2 e 24 horas de imersão, densidade aparente, inchamento em espessura após 2 e 24 horas de imersão, ligação interna, arranchamento de parafuso (topo e face) e flexão estática. Os resultados indicaram que para os painéis confeccionados, o tipo de partícula, conjuntamente com os adesivos modificados pelo tanino, apresenta potencialidade limitada de uso, indicando qualidade inferior aos do adesivo comercial ureia formaldeído. Palavras-chave: resíduo de serraria; tanino; adesivo natural; polifenol.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.