Soybean oil and castor oil were modified and used to prepare rigid polyurethane foam with similar properties to a commercial foam used for thermal insulation applications. Soybean oil was firstly modified according to a peracid method, using formic acid and hydrogen peroxide to yield a formiated soy polyol. Furthermore, transesterification was performed with a polyfunctional alcohol to increase OH-functionality. Castor oil, which has hydroxyl groups in the molecular structure, was only transesterified. The vegetable polyols were characterized by OHnumber, Brookfield viscosity, differential scanning calorimetry, and size exclusion chromatography. The foams were prepared at constant NCO/OH ratio (1.2 : 1) by the hand mix method and poured into a closed steel box. They were characterized using scanning electron microscopy, thermogravimetric analysis, and dynamic mechanical analysis. The apparent density and the compression strength of foams were determined, respectively, by the mass/volume relation and through the table tensile tester. After modification, the polyols reached an OH-number between 393 and 477 mg KOH/g oil, showing a low viscosity and molecular weight, allowing the preparation of a rigid vegetable foam with an apparent density of 50 6 1 kg/m 3 and compression strength around 200 kPa. V C 2010 Wiley Periodicals, Inc. J Appl Polym Sci 120: [530][531][532][533][534][535][536][537] 2011
IntroduçãoAs misturas ou blendas poliméricas continuam, apesar de seu longo estudo, a ser foco de pesquisas em diferentes áreas. Nesta área, a mistura de polipropileno e poliestireno é uma das mais estudadas principalmente pelo baixo custo e relevância tecnológica destes materiais [1][2][3][4][5][6][7] . Por outro lado, a compreensão das relações processamentoestrutura-propriedade em misturas poliméricas de sistemas conhecido pode ser, e frequentemente é utilizado para explicar os comportamentos observados em sistemas poliméricos mais complexos. Neste contexto o ensino dos conceitos fundamentais de polímeros, incluindo a sua mistura, é de extrema importância.Neste trabalho, os alunos da disciplina Processamento de Polímeros I (PG24) no Programa de Pós-Graduação em Ciência dos Materiais (PGCIMAT), realizaram em aula todo o processamento dos polímeros (polipropileno e poliestireno) e a produção das misturas poliméricas destes materiais. Após, cada aluno ficou responsável por realizar um tipo de caracterização, que incluía a preparação das amostras, a análise em si e a discussão dos resultados da referida análise. Subsequentemente, os resultados foram confrontados em aula, onde buscou-se as correlações existentes. E por fim, todos os alunos fizeram a revisão deste artigo, incluindo sugestões e críticas. O artigo que se segue tem uma contribuição mínima do professor, que ficou responsável apenas pela revisão final, em busca principalmente por erros gramaticais. Material e Métodos MateriaisNeste trabalho, foram utilizados um polipropileno (PP) de extrusão (Braskem S/A, com MFI = 3,5 g/10 min) e um poliestireno (PS) de uso geral (Innova, MFI = 3,9 g/10 min), sendo processados sem purificação prévia. Mistura no estado fundidoOs polímeros puros e as misturas poliméricas foram processados no estado fundido em uma extrusora de rosca dupla Resumo: As misturas ou blendas poliméricas continuam, apesar de seu longo estudo, a ser foco de pesquisas em diferentes áreas. A mistura de polipropileno e poliestireno é uma das mais estudadas principalmente pelo baixo custo e relevância tecnológica destes materiais. Neste trabalho, os alunos da disciplina Processamento de Polímeros I (PG24) no Programa de Pós-Graduação em Ciência dos Materiais (PGCIMAT-UFRGS), realizaram em aula todo o processamento dos polímeros (polipropileno e poliestireno) e a produção das misturas poliméricas. A seguir, cada aluno ficou responsável por realizar um tipo de caracterização, que incluía a preparação das amostras, a análise em si e a discussão dos resultados da referida análise. Subsequentemente, os resultados foram confrontados em aula, onde se buscou as correlações existentes. E por fim, todos os alunos fizeram a revisão deste artigo, incluindo sugestões e críticas. Como esperado, a mistura de polipropileno e poliestireno forma uma blenda imiscível. Além disso, o processamento afetou as características dos polímeros, induzindo redução de massa molar e, como reflexo, redução de suas propriedades físicas. Na mistura PP/PS a separação de fase produziu d...
In this work was employed a 2 3 factorial experiment design to evaluate the castor oil polyurethane-poly(methyl methacrylate) semi-IPN synthesis. The reaction parameters used as independent variables were NCO/OH molar ratio, polyurethane polymerization time and methyl methacrylate (MMA) content. The semi-IPNs were cured over 28 h using two thermal treatments. The polymers were characterized by infrared and Raman spectroscopy, thermal analysis and swelling profiles in n-hexane. The glass transition temperature (Tg) and the swelling were more affect by the NCO/OH molar ratio variation. The semi-IPNs showed Tg from -27 to -6 °C and the swelling range was from 3 to 22%, according to the crosslink density. The IPN mechanical properties were dependent on the cure temperature and MMA content in it. Lower elastic modulus values were observed in IPNs cured at room temperature.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.