In this work, Eucommia ulmoides leaf extract (EUOLstabilized silver nanoparticles (EUOL@AgNPs) incorporated sulfonated polyether sulfone (SPES)/polyethersulfone (PES) electrospun nanofiber membranes (SP ENMs) were prepared by electrospinning, and they were studied for the removal of lead (Pb(II)) and cadmium (Cd(II)) ions from aqueous solutions. The SP ENMs with various EUOL@AgNPs loadings were characterized by X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscope, thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and contact angle (CA) measurements. The adsorption studies showed that the adsorption of Cd(II) and Pb(II) was rapid, achieved equilibrium within 40 min and 60 min, respectively and fitted with non-linear pseudo-second-order (PSO) kinetics model. For Cd(II) and Pb(II), the Freundlich model described the adsorption isotherm better than the Langmuir isotherm model. The maximum adsorption capacity for Cd(II) and Pb(II) was 625 and 370.37 mg g−1 respectively at neutral pH. Coexisting anions of fluoride, chloride, and nitrate had a negligible influence on Cd(II) removal than the Pb(II). On the other hand, the presence of silicate and phosphate considerably affected Cd(II) and Pb(II) adsorption. The recyclability, regeneration, and reusability of the fabricated EUOL@AgNPs-SP ENMs were studied and they retained their high adsorption capacity up to five cycles. The DFT measurements revealed that SP-5 ENMs exhibited the highest adsorption selectivity for Cd(II) and the measured binding energies for Cd(II), Pb(II), are 219.35 and 206.26 kcal mol−1, respectively. The developed ENM adsorbent may find application for the removal of heavy metals from water.

No abstract

PurposeThe conventional textile dyeing process requires various operational characteristics, and determining the most reliable factor in dyeing performance has always been a challenge for the textile industry. Thus, the present paper aimed to evaluate the process sensitivity of C. I. Reactive Blue 194 dyeing of cotton fabric using a statistical technique.Design/methodology/approach An L27 orthogonal array-based Taguchi's methodology was used with six parameters and three levels of each parameter. The signal-to-noise (S/N) ratio and analysis of variance were studied using total fixation efficiency (T%) as the response of the process sensitivity.Findings Results showed that dyebath pH was the most influential factor on the process and total fixation efficiency (p-value = 0.00 and contribution percentage 45.03%), followed by dye-fixing temperature, dye mass, electrolyte concentration, dye-fixing time and material to liquor ratio.Originality/value Overall this study provides a foundation for the determination of dyeing process sensitivity that will be useful in textile industries toward further development.

No abstract

No abstract