Porous piezoresistive sensors offer promising flexible sensing functionality, such as human joint motion detection and gesture identification. Herein, a facile fabrication method is developed using a microwave-based rapid porogen removal technique for the manufacturing of porous nanocomposite sponges consisting of polydimethylsiloxane (PDMS) and well-dispersed carbon nanotubes (CNTs). The porogen amounts and CNT loadings are varied to tailor the porosity and electrical properties of the porous sensors. The sponges are characterized by a scanning electron microscope (SEM) to compare their microstructures, validate the high-quality CNT dispersion, and confirm the successful nanofiller embedding within the elastomeric matrix. Sponges with a 3 wt% CNT loading demonstrate the highest piezoresistive sensitivity. Experimental characterization shows that the sponges with low porosity have long durability and minimal strain rate dependence. Additionally, the developed sponges with 3 wt% CNTs are employed for the human motion detection using piezoresistive method. One experiment includes fingertip compression measurements on a prosthetic hand. Moreover, the sensors are attached to the chest, elbow, and knee of a user to detect breathing, running, walking, joint bending, and throwing motions.
Bark and ambrosia beetles are commonly moved among continents within timber and fresh wood-packaging materials. Routine visual inspections of imported commodities are often complemented with baited traps set up in natural areas surrounding entry points. Given that these activities can be expensive, trapping protocols that attract multiple species simultaneously are needed. Here we investigated whether trapping protocols commonly used to detect longhorn beetles (Coleoptera: Cerambycidae) and jewel beetles (Coleoptera: Buprestidae) can be exploited also for detecting bark and ambrosia beetles. In factorial experiments conducted in 2016 both in Italy (seminatural and reforested forests) and Canada (mixed forest) we tested the effect of trap color (green vs purple), trap height (understory vs canopy), and attractive blend (hardwood-blend developed for broadleaf-associated wood-boring beetles vs ethanol in Italy; hardwood-blend vs softwood-blend developed for conifer-associated wood-boring beetles, in Canada) separately on bark beetles and ambrosia beetles, as well as on individual bark and ambrosia beetle species. Trap color affected catch of ambrosia beetles more so than bark beetles, with purple traps generally more attractive than green traps. Trap height affected both beetle groups, with understory traps generally performing better than canopy traps. Hardwood-blend and ethanol performed almost equally in attracting ambrosia beetles in Italy, whereas hardwood-blend and softwood-blend were more attractive to broadleaf-associated species and conifer-associated species, respectively, in Canada. In general, we showed that trapping variables suitable for generic surveillance of longhorn and jewel beetles may also be exploited for survey of bark and ambrosia beetles, but trapping protocols must be adjusted depending on the forest type.
This paper treats 134 new records of Coleoptera for the province of New Brunswick, Canada from the following 41 families: Gyrinidae, Carabidae, Dytiscidae, Histeridae, Leiodidae, Scarabaeidae, Scirtidae, Buprestidae, Elmidae, Limnichidae, Heteroceridae, Ptilodactylidae, Eucnemidae, Throscidae, Elateridae, Lampyridae, Cantharidae, Dermestidae, Bostrichidae, Ptinidae, Cleridae, Melyridae, Monotomidae, Cryptophagidae, Silvanidae, Laemophloeidae, Nitidulidae, Endomychidae, Coccinellidae, Corylophidae, Latridiidae, Tetratomidae, Melandryidae, Mordellidae, Tenebrionidae, Mycteridae, Pyrochroidae, Aderidae, Scraptiidae, Megalopodidae, and Chrysomelidae. Among these, the following four species are newly recorded from Canada: Dirrhagofarsus ernae Otto, Muona & McClarin (Eucnemidae), Athous equestris (LeConte) (Elateridae), Ernobius opicus Fall (Ptinidae), and Stelidota coenosa Erichson (Nitidulidae). The Family Limnichidae is newly reported for New Brunswick, and one species is added to the fauna of Nova Scotia. Stephostethus productus Rosenhauer (Latridiidae), Tetratoma (Abstrulia) variegata Casey (Tetratomidae), and Chauliognathus marginatus (Fabricius) (Cantharidae) are removed from the faunal list of New Brunswick, and additional records of Lacconotus punctatus LeConte (Mycteridae) are presented and discussed. Lindgren funnel traps provided specimens for 104 (78%) of the species and were the sole source of specimens for 89 (66%) of the species reported here, suggesting they are a very useful tool for sampling Coleoptera fauna in the forests of New Brunswick.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.